BALL BEARINGS
DOUBLE ROW BALL BEARINGS-NSK3308>
DOUBLE ROW BALL BEARING-NTN3307 >
Bore Diameter (d): 30 mm Outside Diameter (D): 72 mm Overall Width (B): 30.2 mm Contact Angle: 30° to 32°Enclosure Type: Open (no integrated rubber seals or shields) Dynamic Radial Load Capacity (C): 41.5 kN Static Radial Load Capacity (C₀): 27.5 kN Limiting Speed: Up to 9,000 RPM Total Weight: Approximately 0.53 kg (1.18 lbs)
3306 a vintage double-row metric angular contact ball bearing designed to handle high radial loads alongside substantial bidirectional thrust.
The New Departure 3306 is a double-row, angular contact ball bearing, or a single-row deep groove ball bearing, often referenced in legacy automotive and industrial catalogs. The standard dimensions for this bearing are a 30 mm bore (inner) diameter, 72 mm outer diameter, and a 30.2 mm width
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3303A>
AF-3236 BEARING .50" X 1.75" X .562" - GEN3300601>
DOUBLE SEALED MINI BALL BEARING - FAF33PP5>
MINIATURE SERIES RADIAL BALL BEARING - FAF33KDD5>
UNGROUND FLANGED BALL BEARINGS-GEN3280701>
BALL BEARINGS-GEN3242301>
BALL BEARINGS-GEN3226488>
DOUBLE SEALED BALL BEARING-GEN3226488>
1/2"-ID FLANGED BALL BEARING - GEN3221201>
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3215>
DOUBLE ROW OPEN FACE BALL BEARINGS
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3212>
DOUBLE ROW OPEN FACE BALL BEARING-NTN3211 >
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3209>
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3208>
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3207>
Inner Diameter (Bore): 20 mm Outer Diameter: 47 mm Width: 20.6 mm Contact Angle: 30 degrees Sealing: Open design (no integrated seals or shields) Clearance: Normal radial internal clearance (unless specified as C2 or C3) Dynamic Load Rating: 20.4 kN Limiting Speed: 14,000 r/m
32018-01 GENERAL BEARING Radial/Deep Groove Ball Bearing - Straight Bore, 0.5000 in ID, 1.1250 in OD, 0.4375 in Width, Open, Without Snap Ring
FLANGED BALL BEARING-GEN3201801>
32004-01GENERALRadial/Deep Groove Ball Bearing - Straight Bore, 0.3750 in ID, 1.1250 in OD, 0.4375 in Width, Open, Without Snap Ring
3/8"-ID FLANGED BALL BEARING-GEN3200401>
DOUBLE SHIELDED BALL BEARINGS-FAF318KDD>
Recently Viewed
1" -12" SAE RETHREAD HEX DIE-PDTER637266 >
5-BOLT 5" -CIRCLE HUB KITS-RED84550UC1 >
Proto® J49007S2 Punch Set, Roll Pin Style, 3/32 to 1/4 in Punch, 7 Punches, 7 Pieces
1/4" X 5/8" USS Stainless Steel Hex Head Capscrew
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
