BALL BEARINGS
51109-J a metric-series, single-direction deep groove thrust ball bearing.
• Bore Diameter (Inner Shaft Washer d): 45 mm (1.7717 in)
• Outside Diameter (Housing Washer D): 65 mm (2.5591 in)
• Overall Height/Width (T): 14 mm (0.5512 in)
• Component Composition: Separable 3-piece kit consisting of:
• 1x Shaft Washer: (Tight bore tolerance to grip the rotating shaft)
• 1x Housing Washer: (Slightly larger clearance bore to sit loosely/stationary in the housing)
• 1x Pressed Steel Ball & Cage Assembly
• Basic Dynamic Load Rating (\(C_{a}\)): ~27,900 N to 34,800 N
• Basic Static Load Rating (\(C_{0a}\)): ~69,100 N
• Limiting Speed (Grease): 3,200 RPM
• Limiting Speed (Oil): 5,000 RPM
5-B MRC specialized, vintage single-direction thrust ball bearing
In industrial manufacturing and mechanical engineering, MRC 5B is a specific model of a precision thrust ball bearing manufactured by the MRC Bearing Company (a brand under SKF). These are standard-grade components used in rotating machinery to handle axial loads.
499502-H Double Sealed Ag Ball Bearing With Snap Ring
DOUBLE SEALED AG BALL BEARING WITH SNAP RING-GUL499502H >
488509 Wide Inner Race Ball Bearing With Snap Ring
WIDE INNER RACE BALL BEARING WITH SNAP RING-GUL488509 >
479210-D 50-mm-ID Sph/OD Insert Bearing
Outer Diameter (OD): 100 mm (3.937 inches) Inner Diameter (Bore): 55 mm (or variations in inches depending on the exact sub-model) Width: 55.6 mm (2.189 inches) Locking Style: Features dual set screws on an extended inner ring for secure shaft mounting. Sealing: Equipped with high-performance standard seals (2F) to block out dust, grime, and oil.
Recently Viewed
MORSE® 25059 8500 Combined Drill and Countersink Set, #1 Min Trade Size, #5 Max Trade Size, 60 deg Included, 5 Pieces, HSS, Bright
1/2-L 1/2" Class-l Round Linear Shaft (in)
1/2" CLASS-L ROUND LINEAR SHAFT (IN)-THP12L >
5.750" X 6.750" X .500" OIL SEAL - CHI57510>
6304-2-RS a standardized, highly common metric-series single-row radial deep groove ball bearing belonging to the "3 Medium" series footprint
DOUBLE SEALED BALL BEARINGS-GEN63042RS>
Dodge® 006058 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-3/16 in Dia Bore, 6-1/4 to 6-3/4 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 8-1/2 in OAL 3-13/16 in OAH
Dodge® 006058 Babbitted Split Pillow Block Plain Sleeve Bearing, 2-3/16 in Dia Bore, 6-1/4 to 6-3/4 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 8-1/2 in OAL x 3-13/16 in OAH
2.625" TRANSFER CASE OUTPUT SHAFT REPAIR SLEEVE
