Dutton-Lainson® 491 Fuel Filter Wrench, 6 in L, For Use With Goldenrod® Fuel Tank Filters, Plastic
Dutton-Lainson® 491 Fuel Filter Wrench, 6 in L, For Use With Goldenrod® Fuel Tank Filters, Plastic
-
BrandDutton-Lainson®
-
UPC085077565850
-
Manufacturer Part Number491
-
CountryUSA
-
MaterialPlastic
-
Length6 in
-
Suitable For Use WithGoldenrod® Fuel Tank Filters
- Designed specifically for easy removal of see thru filter bowl
- Weather resistant plastic, with hole for hanging on storage tank
- Eliminates problem of cracking bowls during element change process
-
UNSPSC27111714
-
Package DescriptionEACH
-
Instruction/Installation Manual
Recently Viewed
Dutton-Lainson® 491 Fuel Filter Wrench, 6 in L, For Use With Goldenrod® Fuel Tank Filters, Plastic
Dutton-Lainson® 491 Fuel Filter Wrench, 6 in L, For Use With Goldenrod® Fuel Tank Filters, Plastic
IDC Select® IDC SDS-30MM Finished Bore QD® Bushing, 30 mm Dia Bore, 2.187 in Dia Barrel, 3-1/8 in Dia Flange, 1-5/16 in OAL, Nodular Graphite Cast Iron
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Koyo 32206JR Metric Series Caged Tapered Roller Bearing, 30 mm Dia Bore, 62 mm OD, 1 Row, 21.25 mm W, 50.7 kN Dynamic/57.9 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Loctite® 198819 Flexible Cure Slow Dry Gasket Sealant, 7 oz Tube
ARC™ 73169 Handy Coated Shop Roll, 50 yd L x 2 in W, 180 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
ARC™ 73169 Handy Coated Shop Roll, 50 yd L x 2 in W, 180 Grit, Fine Grade, Aluminum Oxide Abrasive, Cotton Backing
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
