Pneumatic Ratchet Wrenches
1993-1-VXL 1"-DR AIR IMPACT WRENCH COMPOSITE
High Torque Pneumatic Ratchet Wrench, 1/2 in Drive, 130 ft-lb Torque, 180 rpm Speed, 6 cfm Air Flow, 90 psi, 4 cfm Short Run Air Consumption
802 AIRCAT PNEUMATIC TOOLS
3/8" AIR/PNEUMATIC RATCHET WRENCH - FLO802>
Chicago Pneumatic CP7830H Ratchet Wrench, 1/2 in Drive, 122 N-m Torque, 190 rpm Speed, 21 cfm Air Flow, 90 psi
The CP7830 features a maximum torque up to 90 ft.lbs / 122 Nm allowing quick and easy fastening. The progressive throttle allows users to apply the necessary amount of power safely and effectively. The tool benefits from the patented TriSpring Technology which guarantees anti-slip head design. The grease fitting option on the reverse button allows for easier lubrication. The pneumatic ratchet wrench CP7830 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Chicago Pneumatic CP-9425 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Chicago Pneumatic T023145 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Chicago Pneumatic CP-9429-H Ratchet Wrench, 1/2 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
CP-828 CHICAGO PNEUMATIC TOOL PRODUCTS
3/8" AIR RATCHETS, FEATURES NEW ANTI-SLIP HEAD DESIGN, COMPACT, 1/2" HP MOTOR, 50 FT-LB OF TORQUE-CHCCP828 >
Ingersoll Rand 105-D2 105 Series Mini Wrench, 1/4 in Drive, 25 ft/lb Torque Rating, 250 rpm Speed, 18 cfm Air Flow
The 105 Series of air ratchet wrenches are small, durable, and easy to handle for vehicle repair technicians. The low profile forward/reverse control has a wide diameter for easy gripping and increased control in confined spaces.
Ingersoll-Rand 107XPA Standard Air Ratchet Wrench, 3/8 in Drive, 54 ft-lb Torque, 160 rpm Speed, 19 cfm Air Flow
Ingersoll-Rand 107XPA Standard Air Ratchet Wrench, 3/8 in Drive, 54 ft-lb Torque, 160 rpm Speed, 19 cfm Air Flow
Ingersoll-Rand 109XPA General Duty High Torque Air Ratchet Wrench, 3/8 in Drive, 10 to 60 ft-lb Torque, 220 rpm Speed, 24 cfm Air Flow, 90 psi
The 109XPA ratchet wrenches provide an optimized gear ratio and airflow for exceptional performance and durability with 76 ft-lb maximum torque. The 109 model offers a ½” drive, while the 1099 model sports a ⅜” version.
JET® JSM-30 Angle Driver Heavy Duty Ratchet Wrench, 3/8 in Drive, 50 ft-lb Torque, 150 rpm Speed, 4 cfm Air Flow, 90 psi
JET® JSM-30 Angle Driver Heavy Duty Ratchet Wrench, 3/8 in Drive, 50 ft-lb Torque, 150 rpm Speed, 4 cfm Air Flow, 90 psi
Recently Viewed
Calterm 50187 Wire, Copper Conductor, 18 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
Calterm 50187 Wire, Copper Conductor, 18 AWG Conductor, 2 in L, For Use With Repairs or New Wiring Applications, Domestic
3/4" X 66' BLUE ELECTRICAL TAPE-MMM35BLU >
Dixon® 102-0602C Standard Hose-to-Pipe Fitting, 3/8 in x 1/8-27 Nominal, Barb x Male NPTF End Style, 360 CDA Brass, Domestic
Dixon® 102-0602C Standard Hose-to-Pipe Fitting, 3/8 in x 1/8-27 Nominal, Barb x Male NPTF End Style, 360 CDA Brass, Domestic
Irwin® 5026016 Rotary Masonry Drill, 1/2 in Drill Bit, Round Shank, Tungsten Carbide Cutting Edge, 13 in OAL
Tungsten carbide tip is durable when drilling in concrete and brick. Deep single flute removes dust fast for increased drilling speed and longer bit life. Diamond ground tip has aggressive cutting angles for increased drilling speed. Fits all hammer drills with 3-jaw or Jacobs chuck.
Milwaukee® M18™ FUEL™ 2783-22 Cordless Angle Braking Grinder Kit, 5 in Dia Wheel, 5/8-11 Arbor/Shank, 18 VDC, Li-Ion Battery, 2 Batteries, No-Lock Paddle Switch
The worlds first cordless braking grinder stops accessories in under 2 s, delivers the power of a corded grinder and has upto 10X longer tool life. The M18™ FUEL™ 4-1/2 in / 5 in grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE™ brushless motor provides upto 10X longer motor life and lower cost of ownership. The M18™ REDLITHIUM™ XC5.0 battery pack delivers upto 4X more runtime and 20% more power. The grinder features REDLINK™ Plus™ intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A rapid stop brake feature stops accessories in under 2 s. The 18 V Lithium-Ion grinder's thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side-handle as Milwaukee® legendary high performance corded grinders for maximum durability on the job. Grinding wheel sold separately.
Milwaukee® 48-62-4081 Flat Chisel, 18 mm SDS-Max Shank, 1 in W Blade, 16 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Excellent for general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
