Chicago Pneumatic CP-9425 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Chicago Pneumatic T023145 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
-
BrandChicago Pneumatic
-
UPC015451537548
-
Manufacturer Part NumberT023145
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating21 N-m
-
Minimum Hose Size3/8 in
-
Air Flow Rate11 cfm
-
Air Inlet1/4 in
-
Dimensions6-1/2 in L
-
Sound Level98 dB
-
Speed200 rpm
-
Drive Size1/4 in
-
Drive TypeSquare
- Compact and lightweight
- Progressive tease throttle
- Small ratchet
- Convenient forward and reverse button
-
Alternative Part NumberCP825
-
UNSPSC27111711
-
Package Description1/PK
-
Standards/ApprovalsISO-28927-2|PROP65: This Product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Catalog
-
Instruction/Installation Manual
-
Owners/User Manual
Recently Viewed
Chicago Pneumatic CP-9425 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Chicago Pneumatic T023145 Ratchet Wrench, 1/4 in Drive, 21 N-m Torque, 200 rpm Speed, 11 cfm Air Flow
Gates® Power Transmission Hi-Power® II AA80 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 82 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Vortec Pro® 40027 Multi-Purpose Chip and Oil Brush, 1 in China Bristle Brush, Plastic Handle, Latex Paints, Oil Base Paints, Shellac, Varnishes and Water Base Paints
Weiler® 40027 Multi-Purpose Chip and Oil Brush, 1 in China Bristle Brush, Plastic Handle, Latex Paints, Oil Base Paints, Shellac, Varnishes and Water Base Paints
AIR PNEUMATIC RIGHT ANGLE SANDERS-CHCCP916945 >
26-TOOTH #50-1 CHAIN SPROCKETS IDC 50-B-26-F1.3/16
26 TOOTH SPROCKETS FOR #50 CHAIN
Dichtomatik 75102229 O-Ring, 331 Dash Number, 2.225 in ID x 2.645 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
