Gates® Power Transmission Hi-Power® II AA80 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 82 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
-
BrandGates® Power Transmission
-
UPC72053200126
-
Manufacturer Part NumberAA80
-
CountryUSA|Canada
-
Thickness13/32 in
-
MaterialEPDM
-
Top Width1/2 in
-
Reinforced MaterialFlex-Bonded Polyester
-
TypeBanded Heavy Duty
-
Minimum Pulley Diameter4.138 in
-
Section SizeAA
-
Series9052
-
Number of Ribs1
-
Outside Length82 in
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- The Flex-Weave® cover is constructed for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat
- Gates® curves provide proper cord support and full contact with the sheave groove for uniform loading, uniform wear and increased belt life
-
Alternative Part Number90520080
-
UNSPSC26111801
-
Package DescriptionEACH
-
Standards/ApprovalsARPM/RMA IP-3-2/IP-3-3
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission Hi-Power® II AA80 Banded Heavy Duty Double V-Belt, AA Section, 1/2 in W Top, 82 in L Outside, 13/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Vortec Pro® 40027 Multi-Purpose Chip and Oil Brush, 1 in China Bristle Brush, Plastic Handle, Latex Paints, Oil Base Paints, Shellac, Varnishes and Water Base Paints
Weiler® 40027 Multi-Purpose Chip and Oil Brush, 1 in China Bristle Brush, Plastic Handle, Latex Paints, Oil Base Paints, Shellac, Varnishes and Water Base Paints
AIR PNEUMATIC RIGHT ANGLE SANDERS-CHCCP916945 >
26-TOOTH #50-1 CHAIN SPROCKETS IDC 50-B-26-F1.3/16
26 TOOTH SPROCKETS FOR #50 CHAIN
Dichtomatik 75102229 O-Ring, 331 Dash Number, 2.225 in ID x 2.645 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
TIMING BELTS-JAS532XL050>
