Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
-
BrandChicago Pneumatic
-
UPC015451227081
-
Manufacturer Part NumberT022708
-
CountryUSA|Canada
-
Tool/KitBare Tool
-
Torque Rating70 N-m
-
Minimum Hose Size3/8 in
-
Air Flow Rate15 cfm
-
Air Inlet1/4 in
-
Air Pressure90 psi
-
Dimensions10 in L
-
Sound Level103 dB
-
Speed150 rpm
-
Drive Size3/8 in
-
Drive TypeSquare
-
Exhaust LocationHandle
- Ratchets for general maintenance with excellent durability
- Great power
- CP's patented tri spring anti-slip head design
- Grease fitting on the reverse lever
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 11C962 |
| Grainger | 11C962 |
-
Alternative Part NumberCP828
-
UNSPSC27111711
-
Package Description1/PK
-
Standards/ApprovalsISO-28927-2|PROP65: This Product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Catalog
-
Owners/User Manual
-
Instruction/Installation Manual
Recently Viewed
Chicago Pneumatic CP-9429 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Coilhose® YB40504Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 50 ft L, 300 psi, Hybrid PVC, Import
Coilhose® YB40504Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 50 ft L, 300 psi, Hybrid PVC, Import
CAM FOLLOWERS-SMIYR11/4X>
3/4" 45-DEGREE BLACK STREET ELBOW-JPW3/4B45STE >
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
Koyo CRS-10-1 Inch Series Stud Type Uncaged Needle Bearing Track Roller, 5/8 in Dia x 0.438 in W Roller, 1/4 in Dia x 3/4 in L Stud, Steel Roller
Track rollers (also known as cam followers) are characterized by their thick-walled outer rings that run directly on a track. The thick outer rings permit high load-carrying capability while minimizing both distortion and bending stresses. Sealed designs with internal thrust washers help extend service life under conditions of infrequent lubrication.
