Chicago Pneumatic CP-9429-H Ratchet Wrench, 1/2 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
-
BrandChicago Pneumatic
-
UPC015451028909
-
Manufacturer Part NumberT022970
-
CountryUSA|Canada
-
Tool/KitBare Tool
-
Torque Rating70 N-m
-
Minimum Hose Size3/8 in
-
Air Flow Rate15 cfm
-
Air Inlet1/4 in
-
Air Pressure90 psi
-
Dimensions10 in L
-
Sound Level103 dB
-
Speed150 rpm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Exhaust LocationHandle
- Ratchets for general maintenance with excellent durability
- Chicago Pneumatic's patented tri spring anti-slip head design
- Grease fitting on the reverse lever
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 11C963 |
| Grainger | 11C963 |
-
Alternative Part NumberCP828H
-
UNSPSC27111711
-
Package Description1/PK
-
Standards/ApprovalsISO-28927-2|PROP65: This Product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Instruction/Installation Manual
-
Owners/User Manual
-
Catalog
Recently Viewed
Chicago Pneumatic CP-9429-H Ratchet Wrench, 1/2 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
For use in extremely tight places, mini tubing cutters require minimal swing around the tubing. Mini tubing cutters can be used on copper, steel, stainless steel and aluminum tubing. MC2GRIP has rounded corners and edges of the body for a more comfortable grip when rotating the cutter around tubing. After tightening the feed screw, mini tubing cutters work faster by providing a more consistent cutting force on the wheel.
TB Wood's® synchronous Plus synchronous drives offer the added flexibility of a dual sprocket design that features both metric and standard-tapped holes coupled with a high-capacity synchronous Plus belt. As a result, the synchronous Plus drive offers a significantly higher horsepower rating at the standard industry price.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
RBC® IR7275C Pitchlign® Heavy Duty Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC® IR7275C Pitchlign® Heavy Duty Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
Browning® 3749678 Taper Lock Bushing, 1-13/16 in Dia Bore, 3-3/8 in Dia Barrel, 1-3/4 in OAL, Steel


