HCI Preferred Supplier 18104 Tube Tee, 5/16 in, Compression, CA377 Brass
HCI Preferred Supplier 18104 Tube Tee, 5/16 in, Compression, CA377 Brass
-
BrandGeneric
-
Manufacturer Part Number18104
-
CountryUSA
-
Temperature Rating-65 to 250 deg F
-
MaterialCA377 Brass
-
Fitting/Connector TypeTee
-
Pressure Rating300 psi
-
Method of ManufactureForged
-
Nominal Size5/16 in
-
End StyleCompression
- Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved
- Fair resistance use long nut when greater vibration resistance is needed
- /-0.02 tolerance on all dimensions
- Not recommended for steel tubing
-
UNSPSC40183102
-
Package Description1/PK
-
Standards/ApprovalsASA|ASME and SAE 060401
-
Catalog
Recently Viewed
HCI Preferred Supplier 18104 Tube Tee, 5/16 in, Compression, CA377 Brass
HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 18200 Tube-to-Pipe Adapter, 3/4 x 1/2 in, Compression x MNPTF, Brass
HCI Preferred Supplier 10287 90 deg Elbow, 1/4 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
HCI Preferred Supplier 10287 90 deg Elbow, 1/4 in Nominal, SAE Male Flare x Male NPTF End Style, CA377 Brass
Charlotte PVC 00100 1600, 6 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
HCI Preferred Supplier 35972 Cam and Groove Fitting, 1 in Nominal, Dust Cap End Style, Polypropylene
Browning® 1022193 MVP® Type 15 Web Companion Sheave, 1-3/8 to 3-5/8 in Bushed Bore, 10.4 in OD, 5 Grooves, 10.4 in Dia Pitch, 7-7/8 in W Face
MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.
