Stanley Black & Decker
POWERS 3/4" X 6-1/4" S/S CONCRETE ANCHORS PWR 7344
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 6" WEDGE BOLT ANCHORS PWR7286
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/4" X 7" S/STEEL CONCRETE ANCHORS PWR 7346
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 8-1/2" CONCRETE ANCHORS PWR 7448
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/4" X 8-1/2" S/S CONCRETE ANCHORS PWR 7348
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/4" X 8" WEDGE BOLT ANCHORS PWR 7288
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8 X 3 ZINC F/H PHIL TAPPER SCREW PWR 5852
3/8 X 3 ZINC Flat Head Philips TAPPER SCREW
POWERS 3/8" TO 1" WALL NYLON ZIP-ITS PWR 2345
The Zip-It® anchor is a one-piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a no. 6 or no. 8 screws in 3/8 in to 1 in wallboard. The Zip-It® Jr. Is formed from engineered nylon for use with no. 6 screws in 3/8 in to 5/8 in wallboard.
POWERS 3/8" X 1-3/4" WEDGE BOLT ANCHORS PWR 7220
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" X 11" SPLINE ROTOHAMMER BITS PWR 1402
DeWALT® DW5701 2-Cutter Hammer Drill Bit, 3/8 in Drill Bit, 3/4 in Spline Shank, 8 in D Cutting, Carbide Cutting Edge, 13 in OAL
POWERS 3/8" X 2-1/2" WEDGE BOLT ANCHORS PWR 7222
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" X 2-1/2"MUSH/HD MASONRY SPIKE PWR 5548
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 2-1/4" S/S CONCRETE ANCHORS PWR 7310
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/8" X 2-1/4" ZINC CONCRETE ANCHOR PWR 7410
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
POWERS 3/8" X 2-3/4" S/S CONCRETE ANCHORS PWR 7312
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/8" X 3-1/2" CONCRETE ANCHORS PWR 7414
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 3-1/2" S/S CONCRETE ANCHORS PWR 7314
The Power-Stud® Anchor, is a fully threaded, torque controlled, wedge expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout filled concrete masonry. The threaded version is produced in Type 304 and Type 316 stainless steel.
POWERS 3/8" X 3-1/2"MUSH/HD MASONRY SPIKE PWR 5551
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 3-3/4" S/S CONCRETE ANCHORS PWR 7315
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/8" X 3-3/4" ZINC CONCRETE ANCHOR PWR 7415
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 3" CONCRETE ZINC ANCHORS PWR 7413
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 3" WEDGE BOLT ANCHORS PWR 7224
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" X 4" MUSH/HD MASONRY SPIKES PWR 5552
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
Recently Viewed
Dodge® 023155 207 Non-Expansion Type E-Xtra Triple Lip Top Angle Take-Up Tapered Roller Bearing, 2-7/16 in Dia Bore, 7-1/2 in L x 4 in W x 7.44 in H, 10600 lb Dynamic/54000 lb Static Load
Type E-Xtra, Type K, double-interlock, TAF and EXL mounted bearings are all general purpose high capacity tapered roller bearings capable of handling any combination of radial and thrust load within the capacity of the bearing. All of these bearings are mounted to the shaft by means of set screw collars having 65 deg set screw spacing for optimum clamping force. The Type E-Xtra, double-interlock, TAF and EXL mounted bearings have locking collars at each end of their extended inner races. Type K has a single locking collar. The tapered roller bearings for these mounted bearings all have case carburized inner races (cones), outer races (cups) and rollers. Bearings are preassembled, prelubricated and factory adjusted. They are normally equipped with land riding contact type seals with a metal deflector guard.
Irwin® Speedbor® 88809 2000 Standard Length Spade Bit, 9/16 in Dia, 6 in OAL, 5 in L Flute Flat Flute, 1/4 in Shank
No matter what wood-boring project you face, IRWIN makes a drill bit to do the job better. Whether the job requires quick, clean holes or precise finish work, there's an IRWIN bit for it. Our mark of quality is stamped on the shank of our full range of bits for every application and every need.
Milwaukee® M18™ 2664-22 High Torque Cordless Impact Wrench Kit With Friction Ring, 3/4 in Square Drive, 0 to 2200 bpm, 525 ft-lb Torque, 18 VDC, 9 in OAL
Engineered for heavy use, the M18™ 3/4 in in high torque impact wrench delivers maximum cordless power on the jobsite. With a Milwaukee® 4-pole motor and powerful impact mechanism, this cordless impact wrench delivers a reliable 525 ft-lb of torque with maximum runtime. The REDLITHIUM™ extended capacity battery pack delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme jobsite conditions. You'll get consistent speed control between 0 to 1900 rpm and 0 to 2200 IPM with the variable-speed trigger. A 3/4 in anvil with friction ring allows quick and easy one-handed socket changes. The M18™ impact wrench's onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there's less downtime on the job. Lightweight and portable, with superior ergonomics, this 18 V cordless power tool offers ultimate comfort during prolonged use. The kit includes two M18™ XC batteries an M18™ and M12™ multi Vage Lithium-Ion battery charger and a carrying case.
METRIC V-BELT 1482MM-JASSPA1482 >
White T8 Linear Fluorescent Tube, 4 Foot, 32W FO32 741 Fluorescent Light Bulbs
Irwin® 49906 I-100 Full Length Auger Bit, 3/8 in Dia, 7-1/2 in OAL, 4-1/2 in L Spiral Flute, 7/32 in Shank
Design provides extra rigidity while boring, wide lands keep bit straight as it bores. Flutes are ground behind the lands to funnel chips to bit inside for cleaner/faster cut. Single spur cutting edges scribes hole, bits have 4-1/2-in twist and 7-1/2-in overall length. Full length heated treated bit.
