Stanley Black & Decker
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials and for post-installed reinforcing bar connections.
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.
DeWALT® Powers® 08437-PWR Manual Quick-Shot Standard Dispenser, 9/9.5 oz Capacity
Ceiling Clips are used for acoustical applications, suspended ceiling systems, fixtures and wire components to concrete, concrete-filled steel deck and steel. Several styles and types of angled clips with pre-mounted pins are available. A Ceiling Clip without a premounted pin is also offered.
Pop-Toggle™ fasteners are Hollow Wall Anchors ideal for static applications requiring light to medium load performance. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. These fasteners are not recommended for use overhead or applications where holding values are critical.
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Wall-Dog™ is an all steel, one-piece screw anchor, which features high profile threads for easy fastening into wallboard and other masonry base materials. The deep cutting, corkscrew-like threads provide for smooth entry and a powerful hold. When removed, the Wall-Dog™ leaves a much smaller hole than toggles or other systems. For aesthetic appearances, the Wall-Dog™ is available in two color finishes: white and chrome; and in two head styles: pan and oval. For fastening into wallboard or wood, no pre-drilling is required - the anchor is inserted through the fixture and screwed in with an ordinary Phillips® screwdriver. Fastening into concrete, hollow or grout-filled concrete masonry, brick and plaster requires a pre-drilled hole using a 3/16 in ANSI bit.
POWERS ZINC ZIP-ITS W/SCREWS PWR 2349-Z
The Zip-It® anchor is a one piece self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with NO 8 screws in 3/8 to 1 in thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with NO 6 screws in 3/8 to 5/8 in wallboard.
Proto® J373 Convertible Retaining Ring-Clip Plier, Standard Jaw, 5-3/4 in OAL
Proto® TorquePlus™ J5748 Standard Length Socket, Imperial, 1 in Square Drive, 1-1/2 in
Proto® TorquePlus™ J5536 Standard Length Socket, Imperial, 3/4 in Square Drive, 1-1/8 in
Proto® TorquePlus™ J5536HL Deep Length Socket, Imperial, 3/4 in Square Drive, 1-1/8 in
Proto® TorquePlus™ ProtoBlack™ J5316B Deep Length Socket, Imperial, 1/2 in Square Drive, 1/2 in
If a tool gets worn from heavy use or damaged from overloading, most users will simply send it in for repair or replacement. However this process can take a couple of days to complete. In order to maintain productivity, many of our industrial customers will keep repair kits on hand for the various tools their workers use. This lets them make repairs right away and minimize downtime. We make repair kits for a number of different tools. These include repair kits for every ratchet that we sell - including our round head, spud and torque ratchets - as well as for other tools like hex bits, chisel and punch holders, pliers, chain wrenches and compression gauges. Ratchet repair kits are designed to replace the internal moving parts located inside the ratchet head. All of our ratchets have been designed to make the repair easy. The user need only remove the retaining ring and cover plate on the ratchet head, slide the existing components out and slide the new ones in. Of course, the best way to minimize the need for repairs is through proper maintenance. Ratchets should be periodically disassembled, have the internal components cleaned with parts cleaner and lubricated with light oil. We suggest that heavy users do this on a monthly basis.
Proto® DuraTek™ JK1404R Screwdriver, 1/4 in Keystone/Slotted Point, Alloy Steel Shank, 8 in OAL, Black Oxide/Polished Chrome, ASME B107.15
Proto® TorquePlus™ J47104 Socket Set, ASME B107.1, 12 Points, 1/4 in Drive, 10 Pieces, Included Socket Size: 3/16 to 9/16 in
Proto® J52110H-TT Hex Bit Set, 3/8 in, 1/2 in Drive, 10 Pieces, Polished Chrome, ASME Specified
Proto® TorquePlus™ J47102 Socket Set, ASME B107.1, 6 Points, 1/4 in Drive, 10 Pieces, Included Socket Size: 3/16 to 9/16 in
Proto® TorquePlus™ J5212M Standard Length Socket, Metric, 3/8 in Square Drive, 12 mm
Proto® TorquePlus™ J5216MH Standard Length Socket, Metric, 3/8 in Square Drive, 16 mm
Proto® TorquePlus™ J7017M Deep Length Socket, Metric, 3/8 in Square Drive, 17 mm
Proto® TorquePlus™ J5219MH Standard Length Socket, Metric, 3/8 in Square Drive, 19 mm
