Regal Rexnord
Sealmaster® 705614 FB Series Non-Expansion Round Straight Standard Duty Flange Mount Ball Bearing Unit, 1 in Dia Bore, 2-1/2 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 1-13/16 in OAL/Dia
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Sealmaster® 705616 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-3/16 in Dia Bore, 2-1/16 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-7/32 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
Sealmaster® 705617 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-1/4 in Dia Bore, 2-3/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-3/4 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
Sealmaster® 705619 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-7/16 in Dia Bore, 2-3/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-3/4 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
T.B. Woods #12 S-FLEX HYTREL COUPLING INSERTS TBW 12-H
Our new Sure-Flex® Plus EPDM and neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment and end float. With Sure-Flex® couplings, the need for lubrication and maintenance is eliminated.
T.B. Woods #8-SC-35 COUPLING SPACER FLANGES TBW 8-SC-35
TB Wood's® Sure-Flex® Plus 8SC35 Bore-To-Size Type SC Spacer Flange, 08 Coupling, 1-7/8 in Bore Dia, 1-5/8 in Length Through Bore, 3-1/4 in Hub Dia, Cast Iron
T.B. Woods 1-1/4"-ID S-FLEX COUPLING HALFS TBW 6-S-1-1/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-1/4"-ID S-FLEX COUPLING HALFS TBW 7-S-1-1/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-1/8"-ID S-FLEX COUPLING HALFS TBW 5-J-1-1/8
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 1-1/8"-ID/BORE #8-SCH SPACER HUBS TBW 8-SC-H-1-1/8
TB Wood's® Sure-Flex® Plus 8SCH118 Bore-To-Size Type SC Spacer Hub, 08 Coupling, 1-1/8 in Bore Dia, 1-23/32 in Length Through Bore, 3-1/4 in Hub Dia, Cast Iron
T.B. Woods 1-11/16"-ID QD E-STYLE BUSHINGS TBW E-1-11/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 1-15/16"-ID QD E-STYLE BUSHINGS TBW E-1-15/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 1-5/8" S-FLEX COUPLING HALFS TBW 6-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-5/8"-ID 7-SCH HUBS TBW 7-SCH-1-5/8
TB Wood's® Sure-Flex® Plus 7SCH158 Bore-To-Size Type SC Spacer Hub, 07 Coupling, 1-5/8 in Bore Dia, 1-15/32 in Length Through Bore, 2-13/16 in Hub Dia, Cast Iron
T.B. Woods 1-5/8"-ID S-FLEX COUPLING HALFS TBW 7-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-5/8"-ID S-FLEX COUPLING HALFS TBW 9-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1/2"-ID S-FLEX COUPLING HALFS TBW 4-J-1/2
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 14-MM-PITCH X 3360-MM TIMING BELTS TBW 3360-14-M-65-W
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
T.B. Woods 2-1/2"-ID S-FLEX COUPLING HALFS TBW 9-S-2-1/2
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 2-7/16"-ID QD E-STYLE BUSHINGS TBW E-2-7/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 22-MM-ID QD QT-STYLE BUSHINGS TBW Q-T-22-MM
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 3/4"-ID S-FLEX COUPLING HALFS TBW 4-J-3/4
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 3/4"-ID S-FLEX COUPLING HALFS TBW 5-J-3/4
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 3/4"-ID/BORE S-FLEX COUPLING HALFS TBW 7-S-3/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
Recently Viewed
S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
Crosby® 1018473 G-209-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
Crosby® 1018473 G-209 Anchor Shackle, 3.25 ton Load, 5/8 in, 3/4 in Dia Pin Screw Pin, Hot Dipped Galvanized
The Crosby G-209 3/4" is a premium, hot-dip galvanized screw pin anchor shackle manufactured by Kito Crosby. Widely considered an industry standard for rigging, towing, and overhead lifting, this specific model features the iconic Red Pin® as a hallmark of genuine manufacturing quality.
Campbell® T9640635 Industrial Grade Anchor Shackle, 1 ton Load, 3/8 in, 0.43 in Dia Screw Pin, Galvanized
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Crosby® 1013272 Missing Link® G-335 Replacement Connecting Link, 7/8 in Trade, 12000 lb Load, Forged Steel, Galvanized
Crosby® 1013272 Missing Link® G-335 Replacement Connecting Link, 7/8 in Trade, 12000 lb Load, Forged Steel, Galvanized
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
