S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
Recently Viewed
S-2140-1-1/2 CROSBY 1-1/2" 30-T BOLT ANCHOR SHACKLES
Working Load Limit (WLL): 30 metric tons (60,000 lbs) with a built-in safety design factor. Stock Number: 1021129 (identifying the specific Crosby self-colored/painted finish model). Material: Forged alloy steel body with a quenched and tempered alloy pin. Pin Diameter: 1.63 inches (41.4 mm), consisting of a secure bolt, nut, and cotter pin configuration. Throat Measurements: Provides a 2.38-inch throat width (between ears) and a 5.75-inch throat depth. Finish: Self-colored / Painted Black (Note: Its counterpart, the G-2140, represents the hot-dip galvanized finish version). Temperature Rating: Certified for reliable use in extreme conditions ranging from
Klein® 5168T Tool Pouch, 6-Pocket, 2-1/2 in W Tunnel Belt, Leather
MORSE® 11099 1322 General Purpose Taper Length Drill, #12 Drill - Wire, 0.189 in Drill - Decimal Inch, 6 in OAL, HSS, Black Oxide
MORSE® 11099 1322 General Purpose Taper Length Drill, #12 Drill - Wire, 0.189 in Drill - Decimal Inch, 6 in OAL, HSS, Black Oxide
Leviton® 2537 Pedestal Standard Lampholder, 660 W Lamp, 600 VAC, 1-Pin Fluorescent Lamp
AUTOMATIC DARKENING ADJUSTABLE WELDING HELMET-FOR55681>
Hougen® RotaLoc Plus™ 17218 Standard Geometry Annular Cutter, 9/16 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Bayonet Style Twist Lock Shank
RotaLoc Plus™ Annular Cutters are designed for the Hougen® HMD130 low profile drill. They're made of M42 HSS, feature stack cut geometry for penetrating multiple plates in a single pass and are designed for a full 1 in depth of cut. They feature a 5/8 in bayonet style shank mounting for fast change out, with no tools required to install in the drill spindle and can be as easily removed. For optimum cutter tool life and cutter efficiency use Hougen® Slick-Stik™ lubricant or RotaGel™ cutting lube.
