Milwaukee Tool

Milwaukee® close quarters tubing cutters are optimized for tough cuts in tight spaces. The compact design allows access to the tightest spaces. Chrome rollers deliver best in class rust protection while integrated weep holes allow water to drain from the tool. Directional grip allows better handling and quick identification of swing direction for easy use. Includes 1/2 in., 3/4 in., and 1 in. cutters and a storage case.

Get maximum performance from your Milwaukee® Selfeed drill bits in soft woods and plywood with the coarse thread feed screw. The 1/4 in. replacement feed screw is designed for Selfeed bits sized 1 in. to 2-9/16 in..use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.

Milwaukee® 2997-22J M18™ Fuel 2-Tool Power Tool Combination Kit, Tools: Hammer Drill Driver/Impact Driver, 18 VDC

The M18™ FUEL™ 2-tool combo kit is the highest performing hammer drill and impact driver combo kit on the market. Included is the M18™ FUEL™ hammer drill (2704-20), the most powerful 18 V cordless drill on the market. Delivering up to 1200 in-lb of torque and up to 2000 rpm, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18™ FUEL™1/4 in hex impact driver (2753-20), the most powerful impact driver in its class. At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. M18™ FUEL™ features the most advanced cordless technology available A POWERSTATE™ brushless motor REDLINK™ Plus™ electronic intelligence and REDLITHIUM™ battery technology, resulting in longer motor life, more runtime and more power.

1/2" HAMMERDRILL/DRIVER/IMPACT KIT-MWK279722>

The M18™ cordless system's patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™, the M18™ cordless system delivers more torque, more power and longer runtime than the competition.

The M18™ FUEL™ 2-tool Combo kit with ONE-KEY™ is the highest performing hammer drill and impact driver in the industry with the added control of ONE-KEY™. The kit includes the M18™ FUEL™ 1/2 in. Hammer drill/driver w/ ONE-KEY™ (2806-20) that delivers up to 60% more power, up to 1.5 in. Shorter length and up to 2X faster speed under heavy load. At 1,200 in-lbs of torque and only 6.9 in. in length, it has the power for demanding applications and ability to access tight spaces. The hammer drill's anti-kickback technology increases control in bind-up situations and reduces unwanted shut-downs, with the added benefit of controlling sensitivity preferences. Also included is the M18™ FUEL™ 1/4 in. Impact driver w/ ONE-KEY™ (2857-20). It is the fastest, most compact, and most powerful impact driver in its class. With up to 2,000in-lbs of torque, it delivers up to 30% faster driving speed at only 4.59 in. in length, with up to 25% more power. The M18™ REDLITHIUM™ battery packs deliver more work per charge and more work over the life of the packs than competitors. Both tools are ONE-KEY™ compatible, allowing users to customize, track and manage their tool for increased productivity. Using the tool's tracking functionality, if ever lost or stolen, lock it out to protect your investment.

The Milwaukee billet torpedo level features amplified rare earth magnets for over 2X the holding power of leading competitors. The maximized viewing area ensures that the user can make a fast and accurate readings of 1/8 in. and 1/4 in. per foot in any position. The optimized top and back side pipe grooves make this the optimal tool for working with both small and large diameter pipes. The 48-22-5107 Milwaukee billet level also offers a weld clearance and laser etched ruled edge.

COMPLETE REPAIR KITS FOR MODEL A-MWSK10>

Switch box, 30 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. A second outlet is located on the backside of the unit. Supplied as standard equipment with Vac-u-rig model 4136.

The Milwaukee® model 4130 dymo-rig stand designed for the heavy duty hole driller. Larger column and base assembly ensure strength and durability for many years service. dymo-rig stands feature large wheels for ease of movement. You can bolt it to the wall or the floor or use the optional vac-pad for added versatility.

Vacuum pad assembly for use with models with detachable vacuum pads, 4115, 4125, 4130, and 4136. Single vacuum pad which provides approximately 1,800 Lb. of holding force. Supplied as standard equipment (with models 4115-22 and 4120-22).

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

1-1/4" DIAMOND CONCRETE CORE BITS-MWK48161260 >

3-1/2" DIAMOND CONCRETE CORE BITS-MWK48163511>

8" DIAMOND CONCRETE CORE BITS-MWK48168006>

10" DIAMOND CONCRETE CORE BITS-MWK48169506>

12" DIAMOND CONCRETE CORE BITS-MWK48169605>

This spacer mounts between the cradle and the diamond drill motor to increase the bit capacity from 10 in. to 14 in. For use with models 4125, 4130 and 4136.

This is the same base assembly included with diamond drill rig model 4130 and 4136 and can be used with models 4125. Use when drilling area is not in confined spaces. This base offers greater support for the diamond drill rig and vacuum assembly than the 48-10-0080 base. Includes two wheels and four leveling screws.

This contractor series large base stand features a cast aluminum base with 4 levelling screws for fast accurate levelling adjustment. The durable precision ground 2-1/2 in steel column is 43-1/2 in high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side.

Switch box, 20 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. Supplied as standard equipment with diamond drill rig model 4115-22 and 4120 - 22.

This contractor series large base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side. Model 4120-22 comes with model 4096 coring motor, Vac-U-Rig® kit as well as a meter box. The Vac-U-Rig® assembly uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig. This aids in stability when coring holes.