Milwaukee Tool

For materials up to 1/2 in. these Carbide tipped steel plate cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.

Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.

Milwaukee® 49-12-0362 Sander Guard, For Use With Milwaukee® 6081-20 Sanders, 5 in Dia

Drop forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Features: asphalt cutter. 1-1/8 in. collared hex shank with notch. 5 in. width x 17-1/2 in. overall length. Made from forged high grade steel.

5" X 5/8" -11 BACKING PAD KITS-MWK49363465 >

The Milwaukee® SDS plus bits with 1/4 in. hex are designed specifically for Tapcon® screw applications. Built to take on brick, block, and concrete Milwaukee SDS bits feature 2-cutter geometry for fast drilling and debris removal. The patented, reinforced flute design increases impact resistance and transfers energy directly to the bit tip. Patented rebar chamfers withstand impact from rebar and hard aggregate, and reduce Carbide chipping. To be used with drive sleeve available in the SDS-Plus Tapcon® installation kit (48-20-7497). Tapcon® is a registered trademark of Illinois tool works Inc.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters (also available in metric from 16 mm to 38 mm).

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

The Milwaukee jobsite tech bag was designed with professional tradesmen in mind and is built with durable 1680D ballistic material and an impact resistant, molded base that is designed to be up to 5X more durable than competitive units. It features a protected tech pocket that provides users with a separate and secure means to store and transport a laptop or tablet while an integrated rain fly provides additional protection from the weather. Also featuring 53 total pockets, a fold down front storage panel, and a padded shoulder strap, the Milwaukee jobsite tech bag provides the extreme durability and functionality that confirms Milwaukee's commitment to providing innovative, durable storage solutions.

For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6145 to a sander.

Milwaukee® metal circular blades were specifically designed to exceed the expectations of contractors for blade life, cut quality and speed in the most demanding metal cutting applications without a lubricant. A hand-tensioned, hardened alloy steel body extends blade life and delivers the highest quality cuts available. Carbide tipped teeth with alternate top bevel grind shear through metal leaving burr-free, cool-to-touch cuts.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground Carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features combine for a good quality blade that contractors can depend on, time and time again.

Milwaukee® 6-in-1 combination pliers for non-metallic feature a New-To-World, forged dual head design for stripping NM wire as well as needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation and won't open when stored in a pouch or backpack. Milwaukee® 6-in-1 combination pliers deliver maximum productivity for the trades. The Milwaukee® 48-22-3070 is perfect for the toughest of jobsites.

Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.

The MILWAUKEE® M18™ 6-Piece Combo Kit is powered by the M18™ cordless system to deliver more torque, power, and longer run-time than the competition. This M18™ REDLITHIUM™ cordless system’s patented technology and electronics feature an innovative motor design and superior ergonomics to provide the most efficient blend of power, weight, and performance in the industry. This 6 piece power tool kit includes the 1/2 in. M18™ Compact Drill/Driver (2606-20), M18™ 1/4 in. Hex Impact Driver (2656-20), M18™ Circular Saw (2630-20), M18™ Sawzall (2621-20), M18™ Grinder (2680-20), (2626-20) M18™ Multi-Tool (2626-20), M18™ 3.0 Ah Battery (48-11-1828), M18™ 1.5 Ahr. Battery (48-11-1818), and an M12™/M18™ Dual Voltage Charger (48-59-1812).

Get professional-grade performance with the Milwaukee® 4 in. 6 TPI high-carbon steel jig saw blade (5-Pack). These blades are designed and built to handle heavy-duty jobs. With Milwaukee's attention to blade material, tooth shape and sharpness, this is a reliable general-purpose blade for very fast, rough cutting in wood. This blade has a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

6" BACKING PADS-MWK49362175>

Milwaukee®'s SDS Max and Spline thin wall core bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin.

Milwaukee® diamond coring bits in Dymobits in are designed to optimize drilling performance over a broad range of applications. We define drilling performance as the best balance of speed, life and overall drilling costs. State-of-the-art manufacturing techniques and the latest diamond matrix technology result in a complete line of bits to meet your most demanding requirements.