Milwaukee Tool

3/4" X .014 X 1/4"-SHANK CRIMPED WIRE END BRUSH - MWK48521010 >

Milwaukee® diamond coring bits - "Dymobits" are designed to optimize drilling performance over a broad range of applications. We define drilling performance as the best balance of speed, life and overall drilling costs. State-of-the-art manufacturing techniques and the latest diamond matrix technology result in a complete line of bits to meet your most demanding requirements.

3/4" X .014 X 1/4"-SHANK KNOT END WIRE BRUSH - MWK48521030 >

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life.

Two cutter spline bits have a series of 12 spline that slide into an equal but opposite set of spline in the drive system of the spline drive hammer. This positive engagement of spline to spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 in. to 1-1/2 in. diameters as well as metric diameters. One per package.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

Removes excess concrete, produces exterior finish, roughens surface before surface coating.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.

Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package.

Steel Hawg arbor with 3/4 in. shank for use in Milwaukee magnetic drill motor 4262 - 1. This arbor adapts threaded Steel Hawg cutters to a 3/4 in. chucked motor. For best cutting results use Hawg wash cutting fluid to keep cutting surface cool and lubricated. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately for distributing cutting fluid during drilling.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.

3/8" (3/8" -24) DRILL CHUCKS-MWK48660795 >

3/8" 100-RPM ELECTRIC DRILL-MWK02291>

Get maximum versatility in this 3/8 in workhorse drill. The 3/8 in Magnum® drill with all metal chuck and QUIK-LOK™ cord features a powerful motor for optimal speed and torque for hole saws, twist bits and light fastening jobs. The all metal gear case and diaphragm provide high durability on the jobsite the ergonomic, tactile grip and two finger trigger optimize your comfort and balance. Add the convenience and extra grip strength of the Grip-Lok™ chuck and a heavy duty detachable cord and you have unchallenged value.

Built to handle industrial and construction applications with ease. The 3/8 in Magnum® drill with keyless chuck has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under 1 min.

Perform at higher speeds. The 3/8 in Magnum® drill with all metal chuck makes drilling, surface finishing and other maintenance tasks go quickly with its extra speed. The drill's powerful motor delivers upto 2500 rpm the all metal gear case and diaphragm provide high durability on the jobsite while the Grip-Lok™ chuck adds convenience and extra grip strength. The ergonomic, tactile grip and two finger trigger optimize user comfort and balance.

Work more efficiently with the most versatile right angle drill/driver on the market. With a head size of just 3-3/4 in., this M12TM right angle drill/driver is compact and lightweight for drilling and fastening in tight spaces, yet delivers 100 in-lbs of torque. It's the first subcompact with a spindle lock chuck for maximum versatility and grip. It also features the industry's first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The M12 REDLITHIUM™ battery pack delivers more work per charge and more work over pack life than the competitors. The inboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job, and a built-in LED light illuminates the work surface. An extended paddle switch gives you ultimate comfort and convenience during prolonged use. The kit includes an M12 REDLITHIUM battery, 30-minute charger and carrying case.

3/8" CORDLESS DRILL-MAK02181>

The M18™ cordless 3/8 in. Compact Impact Wrench is the most powerful 3/8 in. Compact Impact Wrench in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 ipm and 167 ft-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 3/8 in. Compact Impact Wrench features a 3/8 in. friction ring anvil for fast, tool-free socket changes, an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.

The 0370-20 close quarters angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.

3/8" DRILL 3/8" -24 METAL CHUCKS-MWK48661530 >