Milwaukee Tool

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for spline rotary hammers and should be used in hammer only mode.

Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing weld spatter, scale and concrete form overflow and seepage. One per package.

Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed to clean concrete, scale, rust and cut troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.

Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.

Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. Features: moil point. 1-1/8 in. collared hex shank with notch. 20 in. overall length. Made from forged high grade steel.

Black 25 ft L neoprene lined, wire reinforced, oil resistant 1-1/2 in ID hose has 2-molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.

Get professional-grade performance and longer blade life with the Milwaukee® 5 in. 24 TPI bi-metal jig saw blade (5-Pack). These heavy-duty blades last longer than high-speed steel or carbon blades, combining the strength to cut metal with the durability to withstand impacts without breaking. With Milwaukee's attention to blade material, tooth shape and sharpness, the jig saw blades produce clean, fast cuts in metal under 1/8 in. thick. This blade has a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

Soft side contractor bag made of tough water resistant 600 denier material. Provides extra storage for job site tools and accessories. Shoulder strap or dual handle straps for easy carrying. Durable zipper closure. 24-1/2 in. long by 13 in. wide by 14 in. high.

Extend your reach by 2 Ft. when drilling with Milwaukee Selfeed bits, auger bits and hole saws. The quick change shank is 7/16 in. hex. The 7/16 in. hex fits both 3 jawed chucks, 1/2 in. drill capacity and larger, as well as 7/16 in. quick change chucks.

This Milwaukee Quik-Lok® cord is a three wire grounded 25 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.

This Milwaukee® QUIK-LOK® cord is a three wire grounded 25 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee® tools with the QUIK-LOK® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. Cord has a L5-20P NEMA type plug.

Convenient depth control on every screw. The self-drill fastener screwdriver is the ideal tool for controlled depth fastening in a variety of applications. The ramp-off depth locator provides easy, no-slip depth adjustments for consistent driving, while the ergonomic, tactile grip and two-finger trigger enhance your comfort and balance. The all metal gear case and diaphragm are designed for high durability. Use the removable belt clip with bit storage for increased portability and convenience on the jobsite.

Handle the toughest jobs with maximum power, speed and runtime. The M28™ cordless Lithium-Ion 1/2 in impact wrench combines 325 ft-lb of torque with 1450 rpm and 2450 bpm to complete heavy duty applications. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides upto 2X more runtime than 18 V batteries. The magnesium gear case offers extreme jobsite durability and lighter weight. The M28™ 1/2 in impact wrench features non-slip, soft-grip surfaces that reduce vibration for comfort and less fatigue during prolonged use. The forward/reverse shuttle is helpfully located above the variable-speed switch for fast, easy access, while the detent kit ensures quick changes as well as superior socket retention. A hanger bracket and heavy duty steel ring are included for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.

The Milwaukee 0779 28 Volt 1/2 in. impact wrench delivers 325 ft. lbs of maximum torque. Powering the 0779 is the revolutionary 28 Volt lithium-ion battery pack exclusively from Milwaukee. Combining high torque with 1,450 RPM and 2,450 ipm, the 0779 provides the power, speed and run-time to drive larger lags, drill bigger holes, and remove larger nuts. The powerful Milwaukee 28 V motor makes breaking loose stuck nuts a breeze. The heavy-duty magnesium mechanism housing provides extreme job-site durability. The 0779 comes equipped with comfortable non-slip, soft-grip surfaces that reduce vibration and fatigue. The forward/reverse shuttle is conveniently located above the variable speed switch for fast, easy access. Designed for heavy-duty use, whether driving large lag screws, anchors and bolts, drilling large holes, or removing lug nuts, the 0779 provides the power, comfort and run-time to finish the job. A heavy-duty steel ring (included) can be attached for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.

Get high torque, maximum speed and up to 2X the runtime of 18 V cordless drills. With 750 in-lb of torque and up to 1800 rpm, the M28™ cordless Lithium-Ion 1/2 in hammer drill is ideal for drilling larger holes and driving larger screws faster. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides up to 2X more runtime than 18 V batteries this hammer drill features a 1/2 in all metal, single sleeve chuck with carbide jaws for maximum grip strength on bits in high torque applications. The non-slip, soft-grip handle reduces vibration for comfort and less fatigue during prolonged use. Use the drill's side handle to increase your leverage and control. The drill comes with 2 M28™ batteries, an M28™ Battery charger and a #2 Phillips bit.

With a powerful M28™ motor the 0780-20 wet/dry vacuum offers longer continuous run time and higher air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry filter delivers excellent fine dust collection and does not need to be changed between wet and dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower and the 1-1/4 in hose allows standard vacuum attachments to be fastened.

Get durability, runtime and power to complete the toughest jobs. The M28™ lithium-ion battery pack is built to handle high-torque applications on the jobsite with ease. Managed by Milwaukee's exclusive REDLINK™ Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. The temperature management system and individual cell monitoring help maximize battery life. Use this high voltage lithium-ion battery pack to power your Milwaukee M28 and V28™ cordless power tools.

Power up V28™ and M28™ lithium-ion batteries in less than one hour. Milwaukee's 28 Volt charger quickly charges V28 and M28 lithium-ion batteries for less downtime on the job. The high-visibility LED light displays the charge status from across the room so you can monitor recharges without interrupting your work. The unit’s pass-through plug conserves valuable outlet space. Get single-charger simplicity when working with all of your V28 and M28 cordless power tools.

The Milwaukee® 0729 Cordless M28™ Portable Band Saw uses a high powered Milwaukee® built motor to deliver optimal cutting speed and performance. Powering the 0729 is the revolutionary 28 V Lithium-Ion battery pack exclusively from Milwaukee®. The 28 V battery pack delivers two times the runtime as most 18 V products, expanding the list of tools that can be driven on this platform. The battery is positioned so that the balance and line of sight to the cut are not compromised. This band saw has the deep cut capacity of 4-3/4 x 4-3/4 in, which makes this tool extremely versatile and productive. The variable speed trigger delivers optimal cutting speeds of 0 to 225/0 to 350 SFPM. The LED light aids in making cuts in dark places. A comfortable non-slip soft grip handle offers a better gripping surface and reduces operator fatigue.

Get high torque, maximum speed and upto 2X the runtime of 18 V cordless drills. With 750 in-lb of torque and upto 1800 rpm, the M28™ cordless Lithium-Ion 1/2 in hammer drill is ideal for drilling larger holes and driving larger screws faster. It's powered by the revolutionary M28™ Lithium-Ion battery (sold separately), which provides upto 2X more runtime than 18 V batteries this hammer drill features a 1/2 in all metal, single sleeve chuck with carbide jaws for maximum grip strength on bits in high torque applications. The non-slip, soft-grip handle reduces vibration for comfort and less fatigue during prolonged use. Use the drill's side handle to increase your leverage and control. The drill comes with a #2 Phillips bit.