L.S. Starrett
Starrett 0-100 DIAL INDICATORS STR 196-A-1-Z
The Starrett 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation. 0-100 with 3 Contact Points, Adapter, 4 Attachments in Case This provides one full rotation of the hand both to the right and left of zero, showing a rise or drop in the work and the amount of that variation.
Starrett #53295 JEWELED DIAL INDICATORS STR 25-441-J
Starrett® 25-441J 25 Series AGD Group 2 Continuous Dial Indicator, 1 in, 0 to 100 Dial Reading, 0.001 in, 2-1/4 in Dial
Starrett #51081 DEPTH GAGES/GAUGES STR 237-M
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. 0-150mm Range, mm/1/2mm.
Starrett "LAST WORD" DIAL TEST INDICATORS STR 711-HSZ
The Starrett 711 Last Word Dial Test Indicator is among the most versatile available. Their small size and variety of attachments will handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator will always know what the correct reading is. Indicator with Body Clamp.
Starrett .375" DIAMETER EDGE FINDERS STR 827-A
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
Starrett .030" TO .062" PIN VISES STR 162-B
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .030-.062" (0.8-1.6mm) Range work.
Starrett .028" FEELER GAUGES STR 667-28
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .028", 12" Length.
Starrett .010" FEELER GAUGES STR 667-10
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .010", 12" Length.
Starrett .010" FEELER GAUGE STOCK--RL/25' STR 666-10
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett .005" FEELER GAUGES STR 667-5
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .005", 12" Length.
Starrett .005" FEELER GAUGE STOCK--RL/25 STR 666-5
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett .004" FEELER GAUGES STR 667-4
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .004", 12" Length.
Starrett .003" FEELER GAUGES STR 667-3
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .003", 12" Length.
Starrett .002" FEELER GAUGE STOCK--RL/25 STR 666-2
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett .0015" FEELER GAUGES STR 667-1-1/2
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .0015", 12" Length.
Starrett .001" FEELER GAUGES STR 667-1
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .001", 12" Length.
Recently Viewed
SUPPLY LINE COMPRESSION VALVE-JWH403261 >
DRILLCO 480N014 Type B Heavy Duty Jobber Length Drill Bit, #14 Drill - Wire, 0.0748 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
2-1/8" -ID QUICK DISCONNECT SK-STYLE BUSHING
V-BELTOUTSIDE CIRCUMFERENCE >117"-JASD112 >
180-GRIT EMERY CLOTH, 1" X 10YD BENCH ROLL - Ideal for hand sanding (dry) and cleaning of metal, wood and pipe ends. Aluminum oxide coating. Open grain prevents loading.
MORSE® 11399 1340 General Purpose Jobber Length Drill Bit, #38 Drill - Wire, 0.1015 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
