L.S. Starrett

Instrument oil is an extra-fine lubricant made to our specifications and used in our factory to lubricate and protect our precision measuring tools and instruments.

Starrett® 1612 Rule Case With Pocket Clip, 6-3/4 in H x 7/8 in W x 3/32 in D, Vinyl

The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.

Starrett 13 squares are very popular with machinists, toolmakers, and patternmakers. The sliding blades are adjustable making it practical for a wide variety of uses. The faces of the head are ground square. 4" Satin Chrome Finish Graduated Blade.

The Starrett 136 has two vials at right angles which permit leveling in both directions without moving the level from the work.

The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.

The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 50-75mm (2-3") rods). Rod diameters are approximately 6mm (1/4") on the A and B sizes, and approximately 8.5mm (11/32") on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 2-12" Range, .001" Grad, 10 Measuring Rods with Case.

The 120 Dial Calipers are the only American made dial calipers. These calipers are used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making these one of the handiest measuring tools available. This caliper has a 0-6" range and .001" graduations with a white dial. Ships in a fitted plastic case.

Starrett® 11MEH-300 Combination Square Set, 2 Pieces, 11-3/4 in L, Hardened Steel Blade, Square Head

Starrett® 11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head

The Starrett 18" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular This product also includes a cast iron head with black wrinkle finish. 18", 4R Grad, Regular Blade.

Starrett® 11H-12-4R Combination Square Set, 2 Pieces, 12 in L, Hardened Steel Blade, Square Head

The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 4" (100mm) Length, 1/8" (3mm) Point Diameter.

The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 3" (75mm) Length, 1/16" (1.5mm) Point Diameter.

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. 1" Range, 0-100 Dial, .001" Grad, without Case.

Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.