Klein Tools
KLEIN TOOLS A-116-4 Pocket Clip Screwdriver 3/32'' Tip 4'' L
Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
Chrome-plated shaft helps prevent corrosion.
Internal flanges provide solid, twist-resistant shaft anchor.
Convenient pocket clip.
Nickel-chrome, precision-forged and polished blades with black tips.
Meets or exceeds applicable ASME / ANSI specifications.
KLEIN TOOLS BD-284 1/4-Inch Keystone Screwdriver 4-Inch Square Shank
Screwdriver has oversized handle that is 35-percent larger than comparable screwdriver handles and delivers up to 50-Percent extra power to perform tough jobs with minimum effort
Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Made in USA
Nickel-chrome, precision-forged and polished blades with black tips
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS D-202-5-C Diagonal-Cutting Pliers - Tapered Nose, 5-Inch
Easy working in confined areas.
Spring-loaded for self-opening action.
KLEIN TOOLS D-227-7-C Diagonal Cutting Pliers, Spring-Loaded, Plastic Cutting, 7-Inch
Pliers precisely cut injection mold sprues, gates, and other plastic
Adjustable 1/16-Inch (2 mm) hollow-head screw keeps knife-edges from damaging each other
Spring-loaded for self-opening action
Flush cutting knives
Forged in the USA with custom, US-made tool steel for maximum durability
Not designed for use on metal
KLEIN TOOLS D-301-7 7-1/8" Standard Long-nose Pliers
STANDARD LONG-NOSE PLIERS, STEEL, 7 3/16 IN
KLEIN TOOLS D-318-5-1/2-C Pliers, Needle-Nose Pliers, 5-Inch
Pliers designed for accurate work in hard-to-reach areas
Knurled jaws for sure wrapping and looping
Spring-loaded for self-opening action
Curved handles provide greater tool control
Forged in the USA with custom, US-made tool steel for maximum durability
Hot riveted joint for smooth action and no wobble handle
KLEIN TOOLS D-327-5-1/2-C 5-9/16" Pliers
5-9/16" LONGNOSE SLIM SMALL JAW PLIER
KLEIN TOOLS D-335-5-1/2-C Long-Nose Pliers/ Extra-Slim Needle-Nose/ 5-1/2 inch
Long, narrow nose and slim hinge for extremely close quarter work. • Finely knurled jaws grip thin wire without damaging it. • Spring-loaded for self-opening action • Curved handles provide greater tool control.
KLEIN TOOLS D-338-5-1/2-C Curved Long Needle-Nose Pliers - Extra Slim
5" LONG NOSE PLIER-
KLEIN TOOLS D-360-11 Pliers, Long-Reach Needle Nose Pliers, Straight Nose, 11-Inch
11" STRAIGHT NOSE LONG NOSE PLIER-KLED36011 >
KLEIN TOOLS D-362-11 Pliers, Long-Reach Needle Nose Pliers, 45 Degree Bent Nose, 11-Inch
45 degree bent nose to reach around obstructions..
Long handles and nose allow for greater access to confined, hard to reach areas.
Long reach design provides greater holding power at the tip with minimal effort.
Hot-riveted joint for smooth action and no handle wobble.
Knurled jaws for sure wrapping and looping.
Plastic-dipped handles for comfort and ease of identification.
Custom, US-made tool steel.
KLEIN TOOLS J-2000-9-ST Ironworker's Pliers, Heavy-Duty Cutting, 9-Inch
Ironworker's Pliers twist and cut soft annealed rebar tie wire
Cuts ACSR, screws, nails and most hardened wire
High-leverage design has 46-percent more cutting power
Hook bend handle and spring-loaded action for self-opening
Made in USA with Custom, US-made tool steel
Induction hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Heavy-duty knurled jaws
Unique handle tempering helps absorb the ''snap'' when cutting wire
Precision-hardened plier head for on-the-job toughness
Plastic-dipped handles for comfort and ease of identification
''Handform'' handles for full gripping and cutting power
KLEIN TOOLS K-21 1/16'' Slotted Screw Holding Screwdriver
Split-blade screw-holding driver wedges into screw slot.
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places.
Not designed for torquing or tightening.
Precision blade for use with small precision screws. Blade thickness of .028'' (1 mm) expanding to .045'' (1 mm).
Has pocket clip.
KLEIN TOOLS K-23 1/8" X 3"3/16-Inch Screw Holding Screwdriver, 3-Inch
Screwdriver split-blade screw-holding driver wedges into screw slot
Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places
Not designed for torquing or tightening
Made in USA for maximum strength and durability
KLEIN TOOLS MM-200 Auto Ranging Multimeter
Auto ranging voltage
Measures AC/DC Voltage - 600V (defaults to the AC voltage range)
Measures AC/DC Current- 10A
Measures capacitance, temperature and frequency
Capacitance 200µF
Temperature -4~1832ËšF
Frequency 1MHz
Resistance Range 40MΩ
Audible continuity with loud buzzer
Data hold and range hold
Diode test
soft touch buttons
Lead storage
µA setting
Back light display and 4000 count display
Protective boot
Low battery indicator and auto power off
CAT III 600V
Basic DC accuracy ±0.5%
Optional Accessories: Replacement Fuse Kit (Cat. No. 69194)
KLEIN TOOLS P-340 Multi-Bit Offset Screwdriver, Phillips #3 and #4
Designed for confined hard-to-reach applications.
Two tip sizes for added convenience.
KLEIN TOOLS S-126 3/8-Inch Nut Driver, 6-Inch Hollow Shaft
Nut Driver reaches into deep recesses
Fits over long bolts and studs
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Made in USA
Chrome-plated shaft helps prevent corrosion
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS S-86-M 1/4-Inch Magnetic Nut Driver, 6-Inch Shank
Nut Driver with powerful nut-holding magnet built into shank
Smooth Comfordome handles fit the palm of the hand comfortably and are color-coded for easy identification
Hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Chrome-plated shaft helps prevent corrosion
Made in USA
Internal flanges provide solid, twist-resistant shaft anchor
Meets or exceeds applicable ASME / ANSI specifications
KLEIN TOOLS SK-234 Screwdriver Set, Slotted Screw Holding, 3-Piece
Screwdrivers have positive gripping action that holds, starts and drives slotted screws in awkward, hard-to-reach places
Split-blade screw-holding screwdriver wedges into screw slot
Includes 3/16-Inch, 1/4-Inch and 5/16-Inch (5 mm, 6 mm and 8 mm) tips
Resealable, seal-tight vinyl pouch with hanging grommet
Made in USA
Not designed for torquing or tightening>
KLEIN TOOLS V-03 #8/#12 5" Slotted Offset Screwdriver
Designed for confined hard-to-reach applications.
Two tip sizes for added convenience
Overall length: 5-Inch
Do NOT use to pry or chisel
KLEIN TOOLS V-04 #12/#16 6" Slotted-tip Offset Screwdriver
#12/#16 6" SLOTTED-TIP OFFSET SCREWDRIVER
KLEIN TOOLS601-6-INS Insulated 3/16'' Cabinet - 6'' Screwdriver
1000V rated for safety.
Two layers of insulation provide protection against electric shock.
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools.
Custom US-made tool steel.
Cushion-Gripâ„¢ handle for superior torque and comfort.
Perfect for electrical, telephone and work in recessed holes and other tight spaces.
This item has been discontinued and replaced by the 601-7-INS.
Klein® 1000 6-In-1 Multi-Purpose Stripper, 26 to 10 AWG Stranded, 22 to 8 AWG Solid Cable/Wire
This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.
Klein® 1000 6-In-1 Multi-Purpose Stripper, 26 to 10 AWG Stranded, 22 to 8 AWG Solid Cable/Wire
This Multi Tool performs 6 different functions with the same tool. It gauges, cuts and strips wire, measures and shears machine screws and crimps insulated terminals and connectors. Use the threaded holes to easily measure the size of a machine screw and cut it if needed. The plastic-covered handles are cushioned for added comfort.
Recently Viewed
9/16" 12-PT SATIN FINISH LONG COMBINATION WRENCH-ARS25468 >
Armstrong® 25-246 Long Length Open End Combination Wrench, 1-7/16 in, 12 Points, 15 deg Offset, 21-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-246 Long Length Open End Combination Wrench, 1-7/16 in, 12 Points, 15 deg Offset, 21-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
16-CU/FT 48X24X24 JOB BOX-GRN2448 >
V-BELTS-PIXB253>
5" X 2" RIGID CASTERS-PJCCF520PS64R >
PIX B35 IS A CLASSICAL V-BELT, 38" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
PIXB35 >
