Klein® 1001 Multi-Tool Electrician's Wire Stripper/Cutter, 22 to 8 AWG Stranded, 26 to 10 AWG Cable/Wire, 7 to 8 mm Shearing
The Klein Tools Wire Stripper Multi-Tool cuts, crimps, and strips solid and stranded wire and shears bolts. Two cutting blades for 8-22 AWG solid and 10-26 AWG stranded wire. The crimping function handles 7-8 mm insulated and non-insulated terminals, lugs, and splices.
-
BrandKlein®
-
UPC092644744013
-
Manufacturer Part Number1001
-
CountryUSA|Canada
-
Cable/Wire Size22 to 8 AWG Stranded, 26 to 10 AWG
-
TypeMulti-Tool
-
Handle MaterialPlastic
-
Handle TypeCushion Grip
-
Shearing Capacity7 to 8 mm
-
Jaw MaterialSteel
-
Body MaterialSteel
-
Overall Length8-1/2 in
- Wire Strippers with 2 wire cutters one at tip, the other halfway back near stripping holes double the utility of this tool
- Multi Tool crimps 7 - 8mm insulated and non-insulated terminals, lugs and splices
- Cleanly shears 4-40, 10-24, 10-32, 8-32 and 6-32 bolts cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire
- Pivot nut adjusts tension
- Wire cutter in nose and below pivot
- Crimping dies color coded for easy identification
- Strip/cut/crimp functions, manual adjustable
- Full-sized, plastic-covered cushioned handles
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 96015060 |
| 317861 |
-
Alternative Part Number8521908
-
UNSPSC27111518
-
IDEA Index ID8521908
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information
-
Specification Sheet
Recently Viewed
Klein® 1001 Multi-Tool Electrician's Wire Stripper/Cutter, 22 to 8 AWG Stranded, 26 to 10 AWG Cable/Wire, 7 to 8 mm Shearing
The Klein Tools Wire Stripper Multi-Tool cuts, crimps, and strips solid and stranded wire and shears bolts. Two cutting blades for 8-22 AWG solid and 10-26 AWG stranded wire. The crimping function handles 7-8 mm insulated and non-insulated terminals, lugs, and splices.
Fenner Drives® Trantorque® TTQM1223 Mini Single Taper Keyless Bushing, 12 mm Dia Bore, 23 mm OD, 26 mm OAL, Steel
The Trantorque® mini series 12 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 12 mm in Dia by means of a mounted mechanical interference fit and transmits up to 81 N-m of torque. Trantorque® mini series 12 mm keyless bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending and/or radial loads. This product has exceptional concentricity and the ability to accommodate bending loads. The Trantorque® mini series has limited axial movement during installation. All Trantorque® units use a single hex nut for speed and simplicity of installation.
GE Q-Line® THQP120 Type THQP Compact Molded Case Circuit Breaker, 240 VAC, 20 A, 10 kA Interrupt, 1 Pole, Thermal Magnetic Trip
THQP breakers are a smaller, smarter solution for today cost and quality conscious contractors and homeowners. Half the width of standard breakers, they allow use of smaller load centers and for maximum savings of space and money. GE is the only manufacturer that gives you this cost advantage without sacrificing flexibility. THQP breakers are one half the width of standard GE breakers but identical in design. They are available from 15 to 50 A and in 1 and 2-pole construction.
Black markings on yellow, with red stud center markings every 16-Inches
Measurements are marked on both sides and both edges, graduated to 1/16-Inch
Engraved graduations on both sides
Constructed of tough nylon, reinforced with glass fibers for added durability, and resistance to weather, abrasion, and most chemicals
Positive locking joints and stainless steel spring hinges for added strength
Inside reading of SAE measurements
Oatey® 34058 Water Heater Pan With 1 to 1-1/2 in PVC Adapter, 24 in, Plastic
Oatey® Plastic Water Heater Pans with 1 in. - 1-½ in. PVC adapter (1-½ in. over) can be installed under electric water heaters to protect from water damage. Available with 1-½ in. PVC drain fittings to allow for connection to indirect drain.
Crescent® HV1312 1000 High Visibility Tape Measure, 12 ft L x 3/4 in W Blade, Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds Graduation
Crescent® HV1312 1000 High Visibility Tape Measure, 12 ft L x 3/4 in W Blade, Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds Graduation
