KLEIN TOOLS MM-200 Auto Ranging Multimeter
Auto ranging voltage
Measures AC/DC Voltage - 600V (defaults to the AC voltage range)
Measures AC/DC Current- 10A
Measures capacitance, temperature and frequency
Capacitance 200µF
Temperature -4~1832˚F
Frequency 1MHz
Resistance Range 40MΩ
Audible continuity with loud buzzer
Data hold and range hold
Diode test
soft touch buttons
Lead storage
µA setting
Back light display and 4000 count display
Protective boot
Low battery indicator and auto power off
CAT III 600V
Basic DC accuracy ±0.5%
Optional Accessories: Replacement Fuse Kit (Cat. No. 69194)
Recently Viewed
Auto ranging voltage
Measures AC/DC Voltage - 600V (defaults to the AC voltage range)
Measures AC/DC Current- 10A
Measures capacitance, temperature and frequency
Capacitance 200µF
Temperature -4~1832˚F
Frequency 1MHz
Resistance Range 40MΩ
Audible continuity with loud buzzer
Data hold and range hold
Diode test
soft touch buttons
Lead storage
µA setting
Back light display and 4000 count display
Protective boot
Low battery indicator and auto power off
CAT III 600V
Basic DC accuracy ±0.5%
Optional Accessories: Replacement Fuse Kit (Cat. No. 69194)
PIX A-100 IS A CLASSICAL V-BELT, 102" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA100 >
Drillco 720A112 Heavy Duty Stub Length Screw Machine Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, Solid Carbide, Uncoated
Slow helix 135° split point provides ease of penetration and increases edge strength. Heavy-duty web, short flute and overall length increase strength and rigidity.Solid Carbide ideally suited for drilling difficult materials (up to Rc 60).
DRILLCO 1000N163 Imperial Silver and Deming Drill, 63/64 in Drill - Fraction, 0.9844 in Drill - Decimal Inch, 1/2 in Shank, HSS
Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have 1/2" shanks, and 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point. 3-flats.
36" X 48" FORKLIFT SAFETY CAGE - VESWP3648>
2-1/2" X .300 HEAD DRIVE PINS WITH 7/8" WASHER-PWR50098 >
