Klein Tools

Heavy Utility Bag constructed with durable No. 8 canvas
Tool bag's top edge is reinforced with 1/4-Inch (0.6 cm) rope
Metal snaps provided on loops for easy attachment to belts up to 3-Inches (76 mm) wide
Ventilating eyelet in bottom
Includes interior pocket

Leather construction
Rugged 2-Inch (51 mm) wide belt fit waist sizes 40-Inch to 48-Inch (102 cm to 122 cm)
Has separate reel-strap with its own buckle that lets you quickly and conveniently put on or take off a Klein tie-wire reel and optional pad without removing the belt or your tool pouch
Strong double-tongue buckle with keeper
Embossed basket-weave pattern

Constructed of rugged, water-resistant 600 x 300 denier polyester to resist wear and tear on the jobsite.
Fits standard 5-gallon bucket.
45 pockets and chain tape thong to carry an assortment of tools.
Water-resistant to avoid the buildup of mold and mildew.
Double layer of polyester at bucket edges for durability.
Interior pockets include: 3 tool sleeves, 1 power tool/cord sleeve, and 6 universal pockets.
Exterior pockets include: 9 driver pockets, 11 pliers pockets, 11 utility pockets, 2 wire stripper pockets and 2 closeable pockets with Velcro® brand fasteners.
Velcro® is a registered trademark of Velcro Industries B.V.
(Tools not included)

2-3/8" COPPER ALLIGATOR CLIPS (EA)

Heavy-duty square shank for wrench-assisted turning
Designed for the most demanding uses
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Heavy-duty square shank for wrench-assisted turning
Bolster reinforces shank for hard use
Designed for the most demanding uses
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Slotted screw-holding feature mechanically holds screws to work where stainless steel is required
Essential when working with non-magnetic screws and installing overhead fixtures
Durable to start and drive screws with 1 tool
Engage the screw holding feature with just the slide of your thumb
Cushion-Grip™ handle for greater torque and comfort
Helps prevent dropping slotted screws on the jobsite
Built to handle the tough jobs with ease

#2 Wire Bending Phillips Screwdriver
Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches
Bends 10, 12 and 14 AWG wire
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Meets or exceeds applicable ASME / ANSI specifications

Narrow cabinet tip permits blade access where space is limited
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Precision-machined tip for exact fit
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Meets or exceeds applicable ASME / ANSI specifications

Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Narrow cabinet tip permits blade access where space is limited

1/16-Inch Keystone Mini Screwdriver, 2-Inch Round Shank
Precision formed tip provides an exact fit for small screw applications
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

1/8-Inch Cabinet Mini Screwdriver, 4-Inch Round Shank
Precision formed tip provides an exact fit for small screw applications
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
Made in USA
Tip-Ident quickly identifies nut driver size
Cushion-Grip™ handles for greater torque and comfort

Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size

Screwdriver's crank-action handle spins screws fast with one hand
Premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Cushion-Grip™ handle for greater torque and comfort

Different size opening on each end of wrench
Ends are offset at 15-degree angle for clearance over obstructions
Nickel chrome-plated for corrosion resistance
Forged from highest quality alloy-steel
Small size: 3/8 in.
Large size: 7/16 in.

Heavy-duty harness design is suited for workers on transmission towers and other elevated sites.
Ultra-Hyde lined waist and leg straps. Ultra-Hyde is a material that looks and feels like leather, yet requires little maintenance.
Durable 1-3/4'' (44 mm) Type 19, or equivalent, nylon webbing harness construction.
Chest and shoulder straps have friction-style buckles for adjustments over a continuous range of sizes.
Waist and leg straps have tongue buckles and grommets for a comfortable fit and positive buckle connection.
Color contrasting shoulder and leg straps simplify putting harness on.
Color contrasting shoulder and leg straps simplify putting harness on.
Fall-arrest D-ring with roller. Drop-forged circle D-ring has corrosion-resistant finish, wear-minimizing roller, and is proof-loaded to meet OSHA regulations. Easily adjusts for proper fit and function.
Seat strap adds extra comfort and support.
Two positioning D-rings. Drop-forged circle D-rings have corrosion-resistant finish, wear-minimizing rollers, and are proof-loaded to meet OSHA regulations.
Fall-arrest/positioning harnesses are designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA.
Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels.
Harnesses are certified and compliant with ANSI and CSA requirements.

Lightweight polyester construction for comfortable all-day use and improved chemical resistance compared to nylon.
One universal size fits most people.
Leg straps have tongue buckles and grommets for a comfortable fit and positive buckle connection.
Friction slide adjusters hold shoulder straps in place so the user does not need to readjust for each use.
Color contrasting shoulder and leg straps simplify putting harness on.
Seat strap adds extra comfort and support.
Seat strap adds extra comfort and support.
Fall-arrest harnesses are designed to arrest free falls and distribute impact forces over thighs, pelvis, chest and shoulders as required by OSHA.
Identity and warning tags and/or labels are reminders of proper application and inspection procedures. The Klein name, model, date of manufacture and OPE-system application symbol(s) are permanently and clearly inscribed on these tags and labels.
Harnesses are certified and compliant with ANSI requirements.

Long-strand nylon-filament construction provides very high tensile strength and excellent elasticity
Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap hooks with 11/16-Inch (17 mm) throat opening
For use in positioning, suspension, or retrieval systems. Can also be used with a deceleration unit for fall-arrest
U.S.-made for greater durability and excellent quality

Black markings on yellow, with red stud center markings every 16-Inches
Measurements are marked on both sides and both edges, graduated to 1/16-Inch
Engraved graduations on both sides
Constructed of tough nylon, reinforced with glass fibers for added durability, and resistance to weather, abrasion, and most chemicals
Positive locking joints and stainless steel spring hinges for added strength
Inside reading of SAE measurements

Tape Measure with 16-Foot Reach (standout plus estimated extension of typical user) and a 13-Foot Standout
Uncluttered, easy-to-read bold lines marked on blade every 1/8-Inch
Heavy-duty, tough, durable nylon-coating protects blade printing and delivers longer blade life
Retraction speed brake controls blade speed and protects fingers from touching blade
Measurement scale printed on front and back sides of blade for versatility to address different types of measurements
Double hook can secure tape to items such as studs, conduit, pipes, etc. on front or back side of blade to measure with either measurement scale
Strong magnet on hook attaches to ferromagnetic objects such as steel studs, doors, panels, conduit, etc. for easy measuring
The impact resistant housing is over-molded with a soft touch finish for excellent grip and stands up to jobsite demands
Metal belt-clip securely holds tape measure to belts, pockets, or pouches
Conduit Bending Table and 3-Phase Layout Guide printed on back-side of tape for convenience
Integrated tether hole for use at height
US Patent D803711

Pliers with high-leverage design, with rivet closer to the cutting edge for 36-percent greater cutting power than other plier designs
Short jaws and beveled cutting edges permit close cutting of wire
Laser-hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Made in the USA with custom, US-made tool steel
Plastic-dipped handles for comfort and ease of identification

Ball Peen Hammer with forged high-carbon steel head is hardened for additional durability
Crowned face with uniform bevel
Features a smoothly rounded peen
Straight-grain hickory handle is stained and lacquered to withstand weather
Made in USA
Overall Length: 15-Inches
Weight: 2 pounds