BrassCraft Manufacturing
Dormont® SafetyShield® 0243453 10C, 10C-3132-18B Gas Connector, 1/4 in Nominal, MNPT x FNPT End Style, 43800 Btu/hr Natural Gas, 70080 Btu/hr Liquid Propane Flow Rate, 18 in L, 304 Stainless Steel
This 3/8 inch OD, 1/4 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 18 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as space heaters and wall heaters. Item comes in a bag.
Dormont® SafetyShield® 0242483 20C, 20C-3132-48B Gas Connector, 3/8 in Nominal, MNPT x FNPT End Style, 60500 Btu/hr Natural Gas, 96800 Btu/hr Liquid Propane Flow Rate, 48 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch MIP adapters and is 48 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
Cobra® PST142 Internal Pipe Wrench, 3/8 in, 6 in L
Cobra® PST127 Replacement Blade, For Use With 18 in PVC Saw
Cobra® PST112 Pipe Saw, 18 in L Steel Blade, Plastic Handle
BrassCraft® SF0043X Small Diameter Aerator Adaptor Snap Nipple, For Use With SF0041 and SF0079 Faucet Aerator, Brass, Polished Chrome, Import
BrassCraft® SF0043X Small Diameter Aerator Adaptor Snap Nipple, For Use With SF0041 and SF0079 Faucet Aerator, Brass, Polished Chrome, Import
BrassCraft® ProCoat® CSSTNN-34N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 34 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® ProCoat® CSSTNN-22N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 22 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® ProCoat® CSSTNN-16N Gas Connector With 9/16-24 Fine Thread, 1/4 in, Flare Nut, 16 in L, Stainless Steel, Domestic
Utilizing advanced technologies, our ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.
BrassCraft® ProCoat® CSSL54-60 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 60 in L, Stainless Steel, Domestic
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
BrassCraft® ProCoat® CSSD54-24 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 24 in L, Stainless Steel
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
BrassCraft® ProCoat® CSSD54-18 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 18 in L, Stainless Steel
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
BrassCraft® ProCoat® CSSC44-60 P Gas Connector, 1/2 in, MNPT, 60 in L, Stainless Steel
BrassCraft® ProCoat® CSSC44-60 P Gas Connector, 1/2 in, MNPT, 60 in L, Stainless Steel
BrassCraft® G2R10X C1 1/4 Turn Water Supply Stop, 3/8 in Nominal, FNPT x Compression, 125 psi, Brass Body, Polished Chrome, Domestic
BrassCraft 3/8 in FIP Inlet x 3/8 in OD Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
Recently Viewed
Grey Pneumatic Corporation 1019UM | Socket 3/8" Drive 19Mm Standard Universal Impact
"Grey Pneumatic through our distributors supplies the worlds automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality impact and specialty sockets. We carry a complete line of Impact Socket sets and individuals from 1/4"" drive thru 2-1/2"" and #5 spline drive with hex sizes up to 8"".
We also offer a large selection of star impact drivers, impact hex drivers, triple square drivers, torque limiting extensions plus Impact chisels and accessories. GP sockets and tools are made in Taiwan using the highest quality chrome-molybdenum alloy steel and state-of-the-art manufacturing processes and equipment. Thorough and exact heat treatment, as well as rigid quality control, ensures the correct balance of strength and durability to deliver outstanding performance at the most competitive cost.
GP Tools are available through Automotive and Industrial warehouse distributors, tool stores, mobile tool truck dealers, tire equipment and supply warehouses and other sources that service these markets. GP offers Fast and Reliable service to all of our distributors and their customers."
Universal Impact Socket
Drive End Size 3/8 Inch
Socket End Style 6-Point, Hex
Socket End Size 19 Millimeter
Wrench Depth 11 Millimeter
Socket Length 13 Millimeter
Overall Length 53 Millimeter
Nose Diameter 27 Millimeter
Body Diameter 24 Millimeter
Material Chrome-Molybdenum Alloy Steel
Type High Torque, Standard Length, Metric
Application Automotive, Industrial, Assembly, Mining, Maintenance, Construction and Energy Industry
Packaging Type Poly Bag with Barcode
Grey Pneumatic Corp - 3023UM - Features
High quality chro-moly alloy steel.
GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.
Weight: 1 lbs.
Image shown may not be actual product but represents product.
Poly bag with barcode
Lifetime Warranty
he Grey Pneumatic 4029MD is a 1-inch drive, 29mm metric deep-length impact socket. Constructed from high-quality chrome-molybdenum alloy steel, it features a 6-point design and the GP High Torque Drive, which distributes pressure to prevent fastener rounding and allows for up to 20% more torque. Key specifications for this socket include: Drive Size: 1 inch Socket Size: 29 mm Socket Length: 90 mm (approx. 3.54 inches) Overall Weight: 1.82 lbs
High quality chro-moly alloy steel.
GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.
Weight: 0.9 lbs.
Image shown may not be actual product but represents product.
Poly bag with barcode
Lifetime Warranty
Crescent® CDS101N Socket, Standard Style, 3/4 in Hex Drive, 1-1/2 in Standard Socket, 12 Points
Since 1907, Crescent has offered quality tools with proven innovation that enables professionals and DIY-ers alike to get the job done. All sockets and ratchets we make meet or exceed ANSI load specifications, resulting in tools you can count on to be strong, well-designed, and durable enough to get the job done right, time after time. See why Crescent is Trusted by the Trades.
Grey Pneumatic Corporation 2022UM | Socket 1/2" Drive X 22Mm Standard Universal
"Grey Pneumatic through our distributors supplies the worlds automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality impact and specialty sockets. We carry a complete line of Impact Socket sets and individuals from 1/4"" drive thru 2-1/2"" and #5 spline drive with hex sizes up to 8"".
We also offer a large selection of star impact drivers, impact hex drivers, triple square drivers, torque limiting extensions plus Impact chisels and accessories. GP sockets and tools are made in Taiwan using the highest quality chrome-molybdenum alloy steel and state-of-the-art manufacturing processes and equipment. Thorough and exact heat treatment, as well as rigid quality control, ensures the correct balance of strength and durability to deliver outstanding performance at the most competitive cost.
GP Tools are available through Automotive and Industrial warehouse distributors, tool stores, mobile tool truck dealers, tire equipment and supply warehouses and other sources that service these markets. GP offers Fast and Reliable service to all of our distributors and their customers."
Universal Impact Socket
Drive End Size 1/2 Inch
Socket End Style 6-Point, Hex
Socket End Size 22 Millimeter
Wrench Depth 13 Millimeter
Socket Length 16 Millimeter
Overall Length 65 Millimeter
Nose Diameter 32 Millimeter
Body Diameter 32 Millimeter
Material Chrome-Molybdenum Alloy Steel
Type High Torque, Standard Length, Metric
Application Automotive, Industrial, Assembly, Mining, Maintenance, Construction and Energy Industry
Packaging Type Poly Bag with Barcode
