Dormont® SafetyShield® 0242482 20C, 20C-3132-24B Gas Connector, 3/8 in Nominal, MNPT x FNPT End Style, 85000 Btu/hr Natural Gas, 136000 Btu/hr Liquid Propane Flow Rate, 24 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 24 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
-
BrandDormont®
-
UPC662447099254
-
Manufacturer Part Number0242482
-
CountryUSA
-
FinishYellow Coated
-
Material304 Stainless Steel
-
Nominal Size3/8 in
-
Series20C
-
Outside Diameter1/2 in
-
Length24 in
-
End StyleMNPT x FNPT
-
Flow Rate85000 Btu/hr Natural Gas, 136000 Btu/hr Liquid Propane
- Premium antimicrobial coating for increased safety, durability, and longevity
- 100 Percent factory leak tested
- Premium antimicrobial coating for increased safety, durability, and longevity
- ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
- Smooth, burnished connector ends seal with less torque, making installation easier
- High tensile strength stainless steel is less susceptible to work hardening
- Deep corrugations enhance flexibility and maneuverability of connector during installation
- Gas connector is 100% leak tested
- Approved for indoor and outdoor use
- -40 to 150 deg F temperature
- 1/2 psi max pressure
| Cross-Reference Number |
|---|
| 401420 |
-
UNSPSC40141720
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z21.24/CSA 6.10|ANSI Z21.75/CSA 6.27|ASTM A240|cSAus Certified|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
-
Alternative Part Number20C-3132-24B
-
WarrantyLimited
-
Specification Sheet
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Dormont® SafetyShield® 0242482 20C, 20C-3132-24B Gas Connector, 3/8 in Nominal, MNPT x FNPT End Style, 85000 Btu/hr Natural Gas, 136000 Btu/hr Liquid Propane Flow Rate, 24 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 24 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
Hi-Cap® sheaves (narrow V-belts) are manufactured from class 30 gray iron (30,000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm, or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to run with 3V, 5V, and 8V belts.
Gates® Power Transmission Super HC® PowerBand® 12/5V1600 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 160 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 2/5VX1060 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 106 in L Outside, 35/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
3/4 -MALE PIPE THREADX6 BLACK NIPPLE
