Turnbuckles

7/32" X 6-1/2" TURNBUCKLE-NTL221853 >

Working Load Limit (WLL): 7,200 lbs (3.6 tons) for straight or in-line pulls. Thread / Shank Diameter: 7/8 inch. Take-Up Length: 6 inches. Closed Length: 18 inches. Weight: 4.78 lbs per unit.

5/8" X 6" TURNBUCKLE WITH JAW ON BOTH SIDES 1032616

Crosby jaw & jaw turnbuckles are the perfect rigging solution for closed connection points. The jaw end fitting on both ends can open, allowing you to connect to eye bolts, lifting lugs, and other similar rigging equipment.
The forged jaw ends are fitted with bolts and nuts for sizes between 1/4" and 5/8", and pins and cotters on all larger turnbuckles. Crosby turnbuckles are designed to easily handle the demands of most rigging applications, ensuring superior performance and a long lifespan.

The jaw end fittings are normalized or endure Crosby's Quenched and Tempered® process to provide consistent performance for critical applications. The turnbuckle bodies are heat-treated for added strength. Hot-dip galvanizing deposits a protective layer on components and helps prevent corrosion, extending both the service life and the appearance of the steel.

Forged and heat-treated steel components: end fittings quenched and tempered or normalized; body normalized.
Jaw ends feature bolt-and-nut connections (1/4"–5/8") or pin-and-cotter assemblies (3/4"–2-3/4").
Modified UNJ thread on end fittings for improved fatigue properties; body uses UNC threads.
Hot-dip galvanized finish for long-term corrosion protection.
Rated for straight or in-line pull only.
Fatigue rated to 20,000 cycles at 1.5× Working Load Limit.
Lock nuts available for all sizes.
5:1 design factor; proof load is 2.5× WLL.
Conforms to ASME B30.26, ASTM F-1145, and Federal Specification FF-T-791b Type 1 Form 1 Class 7.

Crosby jaw & jaw turnbuckles are the perfect rigging solution for closed connection points. The jaw end fitting on both ends can open, allowing you to connect to eye bolts, lifting lugs, and other similar rigging equipment.

The forged jaw ends are fitted with bolts and nuts for sizes between 1/4" and 5/8", and pins and cotters on all larger turnbuckles.
NOTE: Turnbuckles are recommended for straight or in-line pull only.

1/2" X 12" JAW-JAW TURNBUCKLE. Crosby HG-228 Jaw & Jaw Turnbuckles. The Industry Standard in Rigging Hardware

Each HG-227 turnbuckle comes with a jaw on one end and an eye on the other for compatibility with a variety of connection points.

The forged jaw ends are fitted with bolts and nuts (sizes 1/4" through 5/8") or pins and cotters (sizes 3/4" through 2-3/4"), ensuring secure connections and ease of assembly.

The eyes are forged and elongated, facilitating easy assembly and promoting more uniform stress distribution. For most of the turnbuckles (sizes 1/4"-2-1/2"), a shackle one size smaller can be reeved through the eye.

The Crosby HG-227 Jaw & Eye Turnbuckles feature a forged jaw on one end and an elongated eye on the other, providing flexibility for connecting to clevis pins, eye bolts, or shackles. Built for straight-line tensioning, these turnbuckles are ideal for industrial, marine, and structural applications requiring dependable strength and fatigue performance. All components are hot-dip galvanized for corrosion resistance and meet stringent ASME and Federal standards.

Key Features

Forged and heat-treated construction ensures superior strength and toughness.
Jaw ends use bolt-and-nut assemblies for 1/4"–5/8" sizes, and pin-and-cotter connections for 3/4"–2-3/4" sizes.
Elongated forged eye for easy system integration and reduced stress concentration.
Modified UNJ thread on end fittings; body has UNC threads for consistent engagement.
Hot-dip galvanized for maximum corrosion resistance.

Product Name: Crosby HG-226 Eye & Eye Turn buckle Part Number (MPN): 1031537Thread Diameter: 7/8 inch Take-Up (Adjustment): 18 inches Working Load Limit (WLL): 7,200 lbs (3.6 tons)Design (Safety) Factor: 5:1Overall Length (Closed): 32.67 inches Overall Length (Open): 50.67 inches Approximate Weight: 11.5 lbs each

Heat-treated Crosby turnbuckles are designed for strength and durability. Crosby turnbuckles and accessories from US Cargo Control.

he Crosby HG-226 3/4" x 12" is a heavy-duty, hot-dip galvanized steel Eye & Eye turnbuckle designed for high-performance tensioning and rigging applications. Produced by industry leader Kito Crosby under manufacturer part number 1031476, this hardware item is specifically engineered for inline or straight pulling configurations. Technical Specifications Working Load Limit (WLL): 5,200 lbs (2.6 short tons). Design Safety Factor: 5:1. Thread Dimensions: 3/4" diameter with a 12" take-up body length. Closed Length: 24.90". Open Length: 36.90". Product Weight: 5.43 lbs. Compliance Standards: Meets or exceeds ASME B30.26 and ASTM F-1145

The Crosby HG-226 (5/16" x 4-1/2") is a heavy-duty, hot-dip galvanized Eye & Eye open-body turnbuckle primarily engineered for industrial tensioning, rigging, and material handling applications.

You said: CROSBY HG2255/8X6The Crosby HG-225 5/8" x 6" is a heavy-duty Hook & Eye Turnbuckle manufactured by The Crosby Group under part number 1030752. It is designed explicitly for straight or in-line tensioning applications such as tower, construction, and suspension rigging systems.

The Crosby HG-225 3/8" x 6" is a heavy-duty, hot-dip galvanized Hook & Eye Turnbuckle manufactured by The Crosby Group. It is designed specifically for inline or straight-line tensioning applications in rigging, construction, and marine environments.

The Crosby HG-225 3/4" x 6" is a heavy-duty, hot-dip galvanized Hook & Eye Turnbuckle engineered for industrial and marine inline tensioning

CROSBY HG-225 3/4X12 (often typed as G225) refers to a hot-dip galvanized Hook & Eye turnbuckle

The Crosby HG-225 1/4" x 4" is a hot-dip galvanized steel Hook & Eye Turnbuckle manufactured by The Crosby Group under part number 1030636. It is precision-engineered for straight-line or inline tensioning and rigging applications

The part number you are referring to is the Crosby HG-225 1/2" x 6" Hook & Eye Turnbuckle (Crosby Stock Number 1030690), where "HB" is a common industry typo for the galvanized heavy-duty series.This is a premium, open-body rigging component designed strictly for in-line or straight-line tensioning applications. >

The Crosby HG-225 1/2" x 12" (Manufacturer Part Number: 1030734) is a hot-dip galvanized steel Hook & Eye Turnbuckle designed for inline tensioning applications like securing wire rope or adjusting structural rigging.

End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing.
Hot-dip galvanized steel.
Hooks are forged with a greater cross-sectional area that results in a stronger hook with better fatigue properties.

The Crosby HG-228 3/8" x 6" is a heavy-duty, jaw-and-jaw galvanized steel turnbuckle primarily designed for industrial rigging, inline tensioning, and overhead lifting applications. It is manufactured in the United States by Kitaw Crosby and carries the manufacturer part number 1032536.Technical Specifications

3/4X6 HOOK/HOOK TURNBUCKLE-CROHG2233/4X6 >

End fittings are Quenched & Tempered or normalized, bodies heat-treated by normalizing.
Hot-dip galvanized steel.
Hooks are forged with a greater cross-sectional area that results in a stronger hook with better fatigue properties.