HG-228-5/8X6 CROSBY 5/8"X 6"JAW/JAW TURNBUCKLE
5/8" X 6" TURNBUCKLE WITH JAW ON BOTH SIDES 1032616
Recently Viewed
5/8" X 6" TURNBUCKLE WITH JAW ON BOTH SIDES 1032616
Forged and heat-treated steel components: end fittings quenched and tempered or normalized; body normalized.
Jaw ends feature bolt-and-nut connections (1/4"–5/8") or pin-and-cotter assemblies (3/4"–2-3/4").
Modified UNJ thread on end fittings for improved fatigue properties; body uses UNC threads.
Hot-dip galvanized finish for long-term corrosion protection.
Rated for straight or in-line pull only.
Fatigue rated to 20,000 cycles at 1.5× Working Load Limit.
Lock nuts available for all sizes.
5:1 design factor; proof load is 2.5× WLL.
Conforms to ASME B30.26, ASTM F-1145, and Federal Specification FF-T-791b Type 1 Form 1 Class 7.
16" X12' SCHULTE LINEN SHELF-JWH217794>
1 QUART CONCRETE BONDING; ADDITIVE BONDS OLD CONCRETE TO NEW BY PLACING THE ADDITIVE WITH CONCRETE MIX. TRANSLUCENT IN COLOR-JWH267627 >
1/2" X 12" JAW-JAW TURNBUCKLE. Crosby HG-228 Jaw & Jaw Turnbuckles. The Industry Standard in Rigging Hardware
Each HG-227 turnbuckle comes with a jaw on one end and an eye on the other for compatibility with a variety of connection points.
The forged jaw ends are fitted with bolts and nuts (sizes 1/4" through 5/8") or pins and cotters (sizes 3/4" through 2-3/4"), ensuring secure connections and ease of assembly.
The eyes are forged and elongated, facilitating easy assembly and promoting more uniform stress distribution. For most of the turnbuckles (sizes 1/4"-2-1/2"), a shackle one size smaller can be reeved through the eye.
