HG-228-5/8X12 CROSBY 5/8" JAW/JAW TURNBUCKLES
Crosby jaw & jaw turnbuckles are the perfect rigging solution for closed connection points. The jaw end fitting on both ends can open, allowing you to connect to eye bolts, lifting lugs, and other similar rigging equipment.
The forged jaw ends are fitted with bolts and nuts for sizes between 1/4" and 5/8", and pins and cotters on all larger turnbuckles. Crosby turnbuckles are designed to easily handle the demands of most rigging applications, ensuring superior performance and a long lifespan.
The jaw end fittings are normalized or endure Crosby's Quenched and Tempered® process to provide consistent performance for critical applications. The turnbuckle bodies are heat-treated for added strength. Hot-dip galvanizing deposits a protective layer on components and helps prevent corrosion, extending both the service life and the appearance of the steel.
Recently Viewed
HG-228-5/8X12 CROSBY 5/8" JAW/JAW TURNBUCKLES
Crosby jaw & jaw turnbuckles are the perfect rigging solution for closed connection points. The jaw end fitting on both ends can open, allowing you to connect to eye bolts, lifting lugs, and other similar rigging equipment.
The forged jaw ends are fitted with bolts and nuts for sizes between 1/4" and 5/8", and pins and cotters on all larger turnbuckles. Crosby turnbuckles are designed to easily handle the demands of most rigging applications, ensuring superior performance and a long lifespan.
The jaw end fittings are normalized or endure Crosby's Quenched and Tempered® process to provide consistent performance for critical applications. The turnbuckle bodies are heat-treated for added strength. Hot-dip galvanizing deposits a protective layer on components and helps prevent corrosion, extending both the service life and the appearance of the steel.
Crosby® 1030752 HG-225-5/8 X 6 Turnbuckle, Hook/Eye, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16.61 in L Close, Steel
Crosby® 1030752 HG-225 Turnbuckle, Hook/Eye, 5/8 in Thread, 2250 lb Working, 6 in Take Up, 16.61 in L Close, Steel
IKO CR16UU Inch Series Caged Standard Cam Follower With Cylindrical Outer Ring, 1 in Dia x 5/8 in W Roller, 7/16 in Dia x 1 in L Stud, High Carbon Steel Roller
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
The Crosby HG-226 (5/16" x 4-1/2") is a heavy-duty, hot-dip galvanized Eye & Eye open-body turnbuckle primarily engineered for industrial tensioning, rigging, and material handling applications.
Koyo BH-812-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 1/2 in Dia Bore, 3/4 in OD, 3/4 in W, 3910 lbf Dynamic/5790 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
