HG-226 5/16X4-1/2 CROSBY 5/16 X 41/2 EYE TO EYE T/B
The Crosby HG-226 (5/16" x 4-1/2") is a heavy-duty, hot-dip galvanized Eye & Eye open-body turnbuckle primarily engineered for industrial tensioning, rigging, and material handling applications.
Recently Viewed
The Crosby HG-226 (5/16" x 4-1/2") is a heavy-duty, hot-dip galvanized Eye & Eye open-body turnbuckle primarily engineered for industrial tensioning, rigging, and material handling applications.
Koyo BH-812-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 1/2 in Dia Bore, 3/4 in OD, 3/4 in W, 3910 lbf Dynamic/5790 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Crosby® 1013094 Missing Link® G-335-3/16 Replacement Connecting Link, 3/16 in Trade, 800 lb Load, Forged Steel, Galvanized
Crosby® 1013094 Missing Link® G-335 Replacement Connecting Link, 3/16 in Trade, 800 lb Load, Forged Steel, Galvanized
Klein® Cushion-Grip® 601-4 Screwdriver, 3/16 in Cabinet Point, Steel Shank, 7-3/4 in OAL, Rubber Handle, Polished Chrome, ANSI/ASME Specified
Klein's 3/16-Inch Cabinet Tip Screwdriver features a narrow cabinet tip to make tight spaces easily acceptable. This Cushion-Grip™ Handle Screwdriver offers the comfort and torque needed for all day work. Its Tip-Ident® quickly identifies screwdriver type and tip orientation, and its 4-Inch shaft is heat-treated for greater tool strength.
Browning 13-TOOTH G-BUSH #50 CHAIN SPROCKET BRW H-50-G-13
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
