Needle Roller Bearings
Koyo HJ-182620 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/8 in Dia Bore, 1-5/8 in OD, 1-1/4 in W, 10100 lbf Dynamic/15800 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-243320 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 13200 lbf Dynamic/21400 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-243320.2RS Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/2 in Dia Bore, 2-1/16 in OD, 1-1/4 in W, 10700 lbf Dynamic/16300 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-263520 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-5/8 in Dia Bore, 2-3/16 in OD, 1-1/4 in W, 13500 lbf Dynamic/22600 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-283720 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-3/4 in Dia Bore, 2-5/16 in OD, 1-1/4 in W, 13900 lbf Dynamic/23900 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-324116 Inch Series Caged Heavy Duty Needle Roller Bearing, 2 in Dia Bore, 2-9/16 in OD, 1 in W, 12100 lbf Dynamic/20900 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-324120 Inch Series Caged Heavy Duty Needle Roller Bearing, 2 in Dia Bore, 2-9/16 in OD, 1-1/4 in W, 15000 lbf Dynamic/27500 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HJ-486028 Inch Series Caged Heavy Duty Needle Roller Bearing, 3 in Dia Bore, 3-3/4 in OD, 1-3/4 in W, 27900 lbf Dynamic/61400 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Koyo HK1522 Metric Series Caged Open Ends Drawn Cup Needle Roller Bearing, 15 mm Dia Bore, 21 mm OD, 22 mm W, 13.5 kN Dynamic/19.4 kN Static Load
Koyo HK1522 Metric Series Caged Open Ends Drawn Cup Needle Roller Bearing, 15 mm Dia Bore, 21 mm OD, 22 mm W, 13.5 kN Dynamic/19.4 kN Static Load
Koyo JH-1010 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 7/8 in OD, 5/8 in W, 2600 lbf Dynamic/3170 lbf Static Load
Koyo JH-1010 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 7/8 in OD, 5/8 in W, 2600 lbf Dynamic/3170 lbf Static Load
Koyo JT-1213 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 13/16 in W, 3490 lbf Dynamic/4860 lbf Static Load
Koyo JT-1213 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 13/16 in W, 3490 lbf Dynamic/4860 lbf Static Load
Koyo JT-129 JT Series Open End Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 9/16 in W, 2740 lb Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway to the rollers. The small cross-section of the drawn cup bearing provides high load-carrying capability with minimum required space, drawn cup bearings are easily installed with a press fit in the housing.
Koyo JTT-1012 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 3/4 in W, 1980 lbf Dynamic/2910 lbf Static Load
Koyo JTT-1012 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 3/4 in W, 1980 lbf Dynamic/2910 lbf Static Load
Koyo M-12121 Inch Series Closed One End Uncaged Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 3/4 in W, 4930 lbf Dynamic/8710 lbf Static Load
Koyo M-12121 Inch Series Closed One End Uncaged Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 3/4 in W, 4930 lbf Dynamic/8710 lbf Static Load
Koyo M-8121 Inch Series Closed One End Uncaged Drawn Cup Needle Roller Bearing, 1/2 in Dia Bore, 11/16 in OD, 3/4 in W, 3300 lbf Dynamic/6060 lbf Static Load
Koyo M-8121 Inch Series Closed One End Uncaged Drawn Cup Needle Roller Bearing, 1/2 in Dia Bore, 11/16 in OD, 3/4 in W, 3300 lbf Dynamic/6060 lbf Static Load
Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
McGill 1-1/2"-ID NEEDLE BEARINGS MCG MR-24
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-1/2"-ID NEEDLE BEARINGS MCG MR-24-N
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-1/4"-ID NEEDLE BEARINGS MCG MR-20-N
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-1/4"-ID NEEDLE BEARINGS MCG MR-20-S
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-1/8"-ID NEEDLE BEARINGS MCG MR-18
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-1/8"-ID NEEDLE BEARINGS MCG MR-18-N
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-3/4"-ID NEEDLE BEARINGS MCG MR-28-S
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
McGill 1-7/8"-ID NEEDLE BEARINGS MCG MR-30
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Recently Viewed
400-WATT METAL HALIDE BULBS-BULMVR400U >
ENHANCED HEAT DISSIPATION SUPERIOR FLEXIBILITY, WIDE TEMPERATURE RANGE. ANTI-STATIC AND STABLE, CUSTOM SIZING AND UPGRADE OPTIONS
-PIX3VX750 >
4 -MALE PIPE THREADX2 -FEMALE PIPE THREAD GALVANIZED BUSHING
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
PIXB104K>
17 TOOTH DOUBLE SPROCKETS FOR #40 CHAIN-BRWD40B17 >
3/4" WIRE ROPE THIMBLES-NTL177923 >
