Torrington 1"-ID NEEDLE BEARINGS TOR BH-1612
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790215384
-
Manufacturer Part NumberBH-1612
-
CountryUSA
-
Load Capacity6090 lbf Dynamic/10800 lbf Static
-
Temperature Rating250 deg F
-
Maximum Speed5200 rpm
-
Closure TypeOpen
-
TypeOpen Ends Uncaged
-
Width3/4 in
-
SeriesBH Inch Series
-
Outside Diameter1-5/16 in
-
Bore Diameter1 in
- Full complement bearings handle high radial load-carrying capability
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 779K91 |
-
Alternative Part NumberBH1612PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Crosby® 1019506, 2130-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
Crosby® 1019506 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Campbell® T5950324 Repair Link, 1/4 x 1-1/4 in Trade, 400 lb Load, Low Carbon Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
