Crosby® 1019506, 2130-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
Crosby® 1019506 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
-
BrandCrosby®
-
Manufacturer Part Number1019506
-
CountryUSA
-
Load Capacity3.25 ton
-
FinishSelf-Colored
-
SeriesS-2130
-
Inner Length2-3/8 in
-
Inner Width1.69 in
-
Size5/8 in
-
Opening Size1.06 in
-
Body MaterialCarbon Steel
-
Overall Length4.19 in
-
Overall Width3.56 in
-
Eye Outer Size1-1/2 in
-
Pin Diameter0.77 in
-
Pin MaterialAlloy
-
Pin TypeBolt
- Working load limit and grade 6 permanently shown on every shackle
- Approved for use at -40 to 400 deg F
- 3.1 Certification as standard available for charpy and statistical proof test from 3.25 ton up to 25 tons to DNV2.7-1 and EN13889
- Crosby® 3.25 ton through 25 ton G2130OC anchor shackles are type approved to DNV certification notes 2.7-1 offshore containers
- The Crosby® shackles are statistical proof and impact tested to 42 J min average at -4 deg F
- All other 2130 shackles can meet charpy requirements of 42 J average at -4 deg F when requested at time of order
- Look for the Red Pin® the mark of genuine Crosby® quality
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|ABS 2007 Steel Vessel Rule 1-11-17.7|DNV2.7-1 Certified|EN13889|Federal Spec RR-C271F|Type IVA|Grade A|Class 3
-
Catalog
Recently Viewed
Crosby® 1019506, 2130-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
Crosby® 1019506 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Self-Colored
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
BIBB WASHER-JWH400621 >
5.5-OZ TUBE CAULK IS DESIGNED FOR TUB FIXTURES AND TILE. CAN BE LENGTHENED UP TO 500% AND WILL RETRACT BACK 98%. CURES IN 72 HOURS AND MAY BE PAINTED WITH OIL OR LATEX-JWH412708 >
