Campbell® T9640435 Industrial Grade Anchor Shackle, 0.5 ton Load, 1/4 in, 0.31 in Dia Screw Pin, Galvanized
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
-
BrandCampbell®
-
UPC020418211683
-
Manufacturer Part NumberT9640435
-
CountryUSA|Canada
-
Load Capacity0.5 ton
-
FinishGalvanized
-
TypeIndustrial Grade
-
Inner Length1.12 in
-
Inner Width0.78 in
-
Size1/4 in
-
Opening Size1/2 in
-
Body MaterialDrop Forged Carbon Steel
-
Eye Outer Size0.69 in
-
Pin Diameter0.31 in
-
Pin MaterialDrop Forged Carbon Steel
-
Pin TypeScrew
- WLL Marked on Each Shackle
- Do not exceed the working load limit
- Do not exceed the working load limit
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 24F921 |
-
UNSPSC24101641
-
Package DescriptionEACH
-
Standards/ApprovalsUPC Listed
-
WarrantyLifetime Limited
-
Catalog
Recently Viewed
Campbell® T9640435 Industrial Grade Anchor Shackle, 0.5 ton Load, 1/4 in, 0.31 in Dia Screw Pin, Galvanized
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Proto® torque adapters are designed with a center-to-center dimension of 2 in. This means that the distance from the center of the square drive of the mating torque wrench to the center of the fasteners is exactly 2 in. This constant dimension serves to simplify the process of calculating the torque applied.
30 TOOTH SPROCKETS FOR #50 CHAIN
3/8" X 6" STANDARD TIP SQUARE SHANK SCREWDRIVER
United Abrasives-SAIT 23052 Thin High Speed Cut-Off Wheel, 3 in Dia x 0.035 in THK, 1/4 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
Square D™ Homeline™ HOM120GFI Class A Ground Fault Miniature Circuit Breaker, 120/240 V AC, 20 A, 10 kA Interrupt, 1 Pole, Thermal Magnetic Trip
Homeline miniature circuit breakers are engineered and designed for fast installation and superior circuit protection. Homeline circuit breakers are designed to plug into Homeline load centers to provide circuit protection. This circuit breaker provides standard circuit protection and is HACR rated. This 1 pole circuit breaker with plug in mounting is rated 20A at 120 VAC. HOM breakers provide 10 kA breaking capacity. This Homeline ground fault circuit breakers provide overload and short circuit protection, combined with Class A ground fault protection. Class A denotes a ground fault circuit interrupter that will trip when a fault current to ground is 6 milliamperes or more. The electrical connection is a clamp terminal that will accept 2 wires. The clamp terminal will accept a wire range of 14 AWG to 8 AWG copper or aluminum wire. HOM Homeline miniature circuit breakers are UL Listed.
