McGill 2"-ID DBL/SEALED NEEDLE BEARINGS MCG MR-32-SS
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
-
BrandMcGill®
-
UPC726166067229
-
Manufacturer Part Number5453230000
-
CountryUSA
-
Load Capacity12000 lb Dynamic/20700 lb Static
-
Cage MaterialSteel
-
Temperature Rating-20 to 250 deg F
-
Maximum Speed1900 rpm
-
Closure TypeDouble Seal
-
TypeHeavy Duty Standard
-
Seal MaterialRubber
-
Width1-1/4 in
-
SeriesMR Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter2-9/16 in
-
Bore Diameter2 in
- Machined outer race
- Needle roller with end relief
- Annular lubrication groove and holes
- Factory grease fill
- Double seal with both seal lips turned in
-
Alternative Part NumberMR 32 SS
-
UNSPSC31171542
-
Package DescriptionEACH
-
Catalog
-
Specification Sheet
Recently Viewed
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Campbell® T5950324 Repair Link, 1/4 x 1-1/4 in Trade, 400 lb Load, Low Carbon Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Crosby® 1013049 S-247-5/16 -3/8 Double Clevis Link, 5/16 to 3/8 in Trade, 5400 lb Load, Forged/Heat Treated Carbon Steel
Crosby® 1013049 S-247 Double Clevis Link, 5/16 to 3/8 in Trade, 5400 lb Load, Forged/Heat Treated Carbon Steel
Crosby® 1018491, G209-3/4, Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018491 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
