Crosby® 1018491, G209-3/4, Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018491 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
-
BrandCrosby®
-
Manufacturer Part Number1018491
-
CountryUSA
-
Load Capacity4.75 ton
-
FinishHot Dipped Galvanized
-
SeriesMaxtough® G-209
-
Inner Length2.81 in
-
Inner Width2 in
-
Size3/4 in
-
Opening Size1-1/4 in
-
Body MaterialCarbon Steel
-
Overall Length4.97 in
-
Overall Width3.97 in
-
Eye Outer Size1.81 in
-
Pin Diameter0.88 in
-
Pin MaterialAlloy Steel
-
Pin TypeScrew
- Forged quenched and tempered with alloy pins
- Working load limit and grade
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
- Approved for use at -40 to 204 deg C
- Capacities 1/3 thru 55 metric tons, grade 6
- The tests are conducted by Crosby® and 3.1 test certification is available upon request
- +/-0.25 in L tolerance
- +/-0.06 in W tolerance
- Fatigue rated
- Load rated
- 3.25 - 25 ton G209 anchor shackles are type approved to DNV certification Notes 2.7-1- Offshore containers
- These shackles are statistical proof and impact tested to 42 joules min average at -20 deg C
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 29WP65 |
-
UNSPSC24101641
-
Standards/ApprovalsASME B30.26|RR-C-271F Type IVA|Grade A|Class 2|ABS 2007|DNV Certified|CE Certified
-
Catalog
Recently Viewed
Crosby® 1018491, G209-3/4, Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018491 Anchor Shackle, 4.75 ton Load, 3/4 in, 0.88 in Dia Screw Pin, Hot Dipped Galvanized
Proto® J4984 Short Arm Hex Key Set, 9 Pieces, 1.5 to 10 mm Hex, L-Handle Handle, ANSI B18.3.2M, Alloy Steel, Black Oxide
PX-60-TL-1310 Dodge® Para-Flex® 010602 Type H Flange Assembly, 1-7/16 in Bore, 6-1/2 in OD, 1 in, Cast Iron
Dodge® Para-Flex® 010602 Type H Flange Assembly, 1-7/16 in Bore, 6-1/2 in OD, 1 in, Cast Iron
5/32" X 3" STANDARD TIP OFFSET SCREWDRIVER
IKO TLA2216Z Metric Series Caged Shell Standard Needle Roller Bearing With Dust Cover, 22 mm Dia Bore, 28 mm OD, 1 Row, 16 mm W, 11700 N Dynamic/19300 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
3/16" X " 3" CABINET TIP ROUND SHANK SCREWDRIVER
