Torrington 1/2"-ID NEEDLE BEARINGS TOR B-88-OH
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790194184
-
Manufacturer Part NumberB-88-OH
-
CountryUSA
-
Load Capacity2160 lbf Dynamic/3530 lbf Static
-
Closure TypeOpen
-
TypeOpen Ends Uncaged
-
Width1/2 in
-
SeriesB Inch Series
-
Outside Diameter11/16 in
-
Bore Diameter1/2 in
- Full complement bearings handle high radial load-carrying capability
-
Alternative Part NumberB88OHPBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Campbell® T5950924 Repair Link, 3/8 x 1-5/8 in Trade, 1250 lb Load, Low Carbon Steel, Zinc Plated
Campbell® can trace its beginnings back to 1834, when one of the many companies that eventually became what is today the Campbell® brand began manufacturing harnesses for horses. Over the years, countless products were added, including wire rope and chain fittings, drop forged chain hardware, high quality tackle blocks, shackles, hooks and much more.
Crosby® 1018534, G-209-1, Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
Crosby® 1018534 Anchor Shackle, 8.5 ton Load, 1 in, 1.13 in Dia Screw Pin, Hot Dipped Galvanized
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
CRC SL3155 Super White™ Multi-Purpose Non-Flammable Lithium Grease, 35 lb Pail, Semi-Solid to Solid Grease, White, 0 to 300 deg F
A high purity, NLGI Grade 2 multi-purpose white lithium grease. Provides superior lubrication & durability in any weather and most temperatures. Bright white in color. Ideal for when appearance is important.
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
