McGill NEEDLE BEARING INNER RACES MCG MI-68
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
-
BrandMcGill®
-
UPC726166000905
-
Manufacturer Part Number0006800000
-
CountryUSA
-
Lubrication Hole TypeLubrication Hole
-
MaterialChrome Steel
-
TypeStandard
-
SeriesMI Series
-
Inside Diameter4-1/4 in
-
Outside Diameter4.9985 in
-
Bore TypeRound/Spherical
-
Overall Width2.26 in
-
Suitable For Use WithGUIDEROL® GR 80, CAGEROL® MR 80 Bearing
- AMBA standard 18.2 precision rating
- Thru hardened precision ground rings construction
-
Alternative Part NumberMI 68
-
UNSPSC31171500
-
Specification Sheet
-
Catalog
Recently Viewed
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
Apex® 954-3X Power Drive Bit, #3 Square Recessed Point, 1-15/16 in OAL, Steel
Fluke® FLUKE-323 Clamp Meter, 400 A, 600 VAC/VDC, 4000 Ohm, 30 mm Jaw, Backlit Display
True-RMS measurements and optimized ergonomics make the 320 series clamp meters the best general troubleshooting tools for commercial and residential electricians. The Fluke® 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Browning® 3331410 Single Strand QD Bushed Type QD-1 Roller Chain Sprocket, 1/2 in Dia Bore, 9.98 in OD, #60 Chain, 40 Teeth, Steel
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
7.3A VS RECIPROCATING SAW - JWH311255 >
Klein® 808-16 Heavy Duty Straight Claw Hammer, 13 in OAL, Smooth Face Surface, 16 oz Steel Head, Straight Claw, Fiberglass Handle
Electrician's Straight-Claw Hammer has a durable plastic-alloy jacketing helps to protect the neck from fraying and splintering if incorrectly struck or overstruck. It is balanced and designed specifically for use in electrical work. Hammer comes with a comfortable, perforated neoprene grip.

