IKO IRB1412 Inch Series Inner Ring, 7/8 in ID x 1-1/8 in OD, 19.43 mm OAW, For Use With BA1812Z/BHA1812Z and YB1812 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
-
BrandIKO
-
Manufacturer Part NumberIRB1412
-
CountryUSA
-
MaterialHigh Carbon Steel
-
Inside Diameter7/8 in
-
Bore TypeTapered
- Without oil hole
-
UNSPSC31171547
-
Catalog
Recently Viewed
IKO IRB1412 Inch Series Inner Ring, 7/8 in ID x 1-1/8 in OD, 19.43 mm OAW, For Use With BA1812Z/BHA1812Z and YB1812 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
TAPERED ROLLER BEARING CONES-TPR28985 >
PRIME®'s outdoor extension cords are water and weather resistant, flame retardant and made to work. They are ideal for use with power tools, lawn and garden equipment rated up to 15 A. The strain-reliefs are oversized to prevent the wire from separating from the plug and connector.
Littelfuse® POWR-GARD® LFR25100-1CID Indicating Fuse Block, 250 V AC, 100 A, Class: R, 6 to 2/0 AWG Wire, 1 Poles
The new Littelfuse® class H and R blocks offer many advantages over previous generations that are noted in the features and benefits section. Class H and class R fuse blocks are dimensionally the same, but class R blocks incorporate A rejection feature, which only allows class R fuses to be inserted.
Drillco 700A108 Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Uncoated
700 series solid carbide drills retain hardness and sharp edges at high temperature. Their abrasion-resistant qualities make them advantageous for drilling abrasive materials. They offer the advantage of extreme rigidity for greater drilling accuracy.
NIBCO 76-107-01 76-100 2-Piece Standard Configuration Ball Valve, 1-1/2 in Nominal, FNPT End Style, 250 lb, Standard Port, MPTFE/RPTFE Softgoods, Domestic
Apolloâ„¢ 7610701 76-100 2-Piece Standard Configuration Ball Valve, 1-1/2 in Nominal, FNPT End Style, 250 lb, Standard Port, MPTFE/RPTFE Softgoods, Domestic
