Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
-
BrandDodge®
-
UPC782475306039
-
Manufacturer Part Number070377
-
CountryUSA
-
Load Capacity146000 lb Dynamic/196000 lb Static
-
Locking DeviceSpringlok™ Concentric Collar
-
Temperature Rating-100 to 200 deg F
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed870 rpm
-
TypeType S2000
-
Mounting TypeFour-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width5.38 in
-
Base to Bore Centerline5-1/2 in
-
Bolt Center-to-Center Length15 to 16 in
-
Bore Diameter4-15/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height11.13 in
-
Overall Length18.63 in
-
Overall Width6.91 in
- High-capacity double row spherical rollers
- Permits static or dynamic misalignment up to +/- 1 deg
- Factory sealed, lubed, and adjusted
- Expansion capability up to 3/8 in
- Flinger to shield seal and bearing from contamination/damage
- Larger rollers
- More contact area
- Case-carburized inner rings resist cracking
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100941001 |
| Motion Industries | 00572790 |
-
Alternative Part NumberP4B-S2-415R
-
UNSPSC31171510
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
WarrantyLimited
-
Line Drawing
-
Catalog
-
Specification Sheet
-
Warranty Information
Recently Viewed
Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
Dodge® 070377 Type S2000 Pillow Block Roller Bearing Unit, 4-15/16 in Dia Bore, 15 to 16 in L Bolt Center-to-Center, 5-1/2 in Base to Bore Centerline, 18.63 in OAL x 11.13 in OAH
Link-Belt® 10418654 B22400 Pillow Block Spherical Roller Bearing, 1-11/16 in Dia Bore, 5-1/2 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-1/8 in OAL x 4-1/4 in OAH
Self aligning double row spherical roller bearings are designed to distribute the load over the symmetrical rollers, assuring positive tracking and smooth operation. The large roller complement provides high capacity for radial or combined radial-thrust loads. Osculation clearance at the ends of the rollers compensates for shock loads and prevents destructive edge loading. These precision bearings with double contoured retainer pockets are designed to meet a broad range of application requirements.
Dodge® 069438 Imperial Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
12-OZ STYROFOAM BOWLS--CS/1000-WHY12OZBOWL >
Dichtomatik S70115 O-Ring, 115 Dash Number, 0.674 in ID x 0.88 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
FREUDENBERG Simmering® 75040594 B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import, Transcom 15X28X5-SC
FREUDENBERG Simmering® 15X28X5SC-BX B1 Oil Seal, 45 mm ID x 72 mm OD, 10 mm W, NBR Lip, 72 Durometer, Import
