Dodge® 069438 Imperial Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475307937
-
Manufacturer Part Number069438
-
CountryUSA
-
Load Capacity22000 lb Dynamic/24000 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed3520 rpm
-
TypeImperial
-
Mounting TypeTwo-Bolt Base
-
Seal TypeTrident™ Triple Lip
-
Base Width2-1/2 in
-
Base to Bore Centerline2-1/4 in
-
Bolt Center-to-Center Length6.06 to 6.44 in
-
Bore Diameter1-15/16 in
-
Bore TypeRound
-
Expansion TypeExpansion
-
Overall Height4.56 in
-
Overall Length8.38 in
-
Overall Width2.86 in
- Push pull adapter mount
- Grease limiting speeds 30% higher than set screw mounts
- Patented adapter mounting system
- Superior holding power reduces the fretting corrosion caused by vibration
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
| Competitor Name | Competitor Part Number |
|---|---|
| Applied Industrial Technologies | 100738746 |
| Motion Industries | 02317658 |
-
Alternative Part NumberP2B-IP-115RE
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 069438 Imperial Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 6.06 to 6.44 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.38 in OAL x 4.56 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
1.986"-OD GREASE CAPS (CD/2)-REDRG04020>
MORSE® 44570 4581 Center Cutting Double End Regular Length End Mill, 7/16 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 44570 4581 Center Cutting Double End Regular Length End Mill, 7/16 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
2-GRV 3-V-BELT QUICK DISCONNECT SK-BUSH SHEAVES-IDC2/3V1060SK >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
3/8" DIAMETERX3" SHOULDER BOLT-HOL08058 >
