Sealmaster 3"-ID 2-BOLT TRB PILLOW BLOCK UNIT SEA RPB-300-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288480082
-
Manufacturer Part Number550222
-
CountryUSA
-
Load Capacity9630 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed1750 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width3 in
-
Base to Bore Centerline3-1/8 in
-
Bolt Center-to-Center Length8-1/16 to 9-11/16 in
-
Bore Diameter3 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height6-3/8 in
-
Overall Length11-3/4 in
-
Overall Width4-1/2 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-300-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 3"-ID 2-BOLT TRB PILLOW BLOCK UNIT SEA RPB-300-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
FYH® SAA207 23FP7 SAA Cylindrical Ball Bearing Insert, 1-1/4 in Dia Bore, 2.83 in OD, 1.53 in W, 25.7 kN Dynamic/15.4 kN Static Load
FYH® SAA207 23FP7 SAA Cylindrical Ball Bearing Insert, 1-1/4 in Dia Bore, 2.83 in OD, 1.53 in W, 25.7 kN Dynamic/15.4 kN Static Load
Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3750361 Taper Lock Bushing, 2-7/8 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
FYH® SAA208 24FP7 SAA Cylindrical Ball Bearing Insert, 1-1/2 in Dia Bore, 3.15 in OD, 1.72 in W, 29.1 kN Dynamic/17.8 kN Static Load
FYH® SAA208 24FP7 SAA Cylindrical Ball Bearing Insert, 1-1/2 in Dia Bore, 3.15 in OD, 1.72 in W, 29.1 kN Dynamic/17.8 kN Static Load
Milwaukee® 49-12-0305 Type 1 Sander Guard, For Use With Milwaukee® 6081-20 Sanders
