Pillow Block Roller Bearing Units
P-2-BSD-115-E Dodge® 066254 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
P-2-BSD-115 Dodge® 066218 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
P-2-BSD-111-E Dodge® 066252 111 Special Duty Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 7.56 to 7.94 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 9-1/2 in OAL x 6.81 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Moline Bearing 19341315 Type E Pillow Block Bearing, 3-15/16 in Dia Bore, 11-1/2 in L Bolt Center-to-Center, 4-1/4 in Base to Bore Centerline, 15-1/4 in OAL x 8-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 15⁄16 in (3.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341307 Type E Pillow Block Bearing, 3-7/16 in Dia Bore, 11 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 9-1/2 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 15⁄16 in (2.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341207 Type E Pillow Block Bearing, 2-7/16 in Dia Bore, 8-1/2 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321307 Type E Pillow Block Bearing, 3-7/16 in Dia Bore, 10-5/8 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 7⁄16 in (3.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321300 Type E Pillow Block Bearing, 3 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 in (3.0000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 15⁄16 in (1.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321211 Type E Pillow Block Bearing, 2-11/16 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 11⁄16 in (2.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321207 Type E Pillow Block Bearing, 2-7/16 in Dia Bore, 7-7/8 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-11/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321200 Type E Pillow Block Bearing, 2 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 in (2.0000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321115 Type E Pillow Block Bearing, 1-15/16 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 15⁄16 in (1.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321112 Type E Pillow Block Bearing, 1-3/4 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄4 in (1.7500 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321111 Type E Pillow Block Bearing, 1-11/16 in Dia Bore, 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-7/8 in OAL x 4-1/4 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 11⁄16 in (1.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321108 Type E Pillow Block Bearing, 1-1/2 in Dia Bore, 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-7/8 in OAL x 4-1/4 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 1⁄2 in (1.5000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321107 Type E Pillow Block Bearing, 1-7/16 in Dia Bore, 5-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 7-3/8 in OAL x 3-7/8 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 7⁄16 in (1.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321106 Type E Pillow Block Bearing, 1-3/8 in Dia Bore, 5-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 7-3/8 in OAL x 3-7/8 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄8 in (1.3750 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321104 Type E Pillow Block Bearing, 1-1/4 in Dia Bore, 4-9/16 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-1/4 in OAL x 3 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 1⁄4 in (1.2500 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321103 Type E Pillow Block Bearing, 1-3/16 in Dia Bore, 4-9/16 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-1/4 in OAL x 3 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄16 in (1.1875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Link-Belt® 10443071 6800 Two-Piece Split Housed Pillow Block Spherical Roller Bearing Unit With 22200LBK Bearing, 2-3/16 in Dia Bore, 8-1/8 to 9-1/2 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 5-15/16 in OAH
Self-aligning spherical roller bearing pillow blocks and take-ups provide high load carrying capacity for radial or combination radial and thrust loads. They are designed for use on conveyors, dryers, road building equipment, runout tables, fans, crushers, hammer mills and many other high-precision, heavy-duty applications.
Recently Viewed
Gates® Power Transmission Poly Chain® GT® Carbon™ 14MGT-2100-68 Synchronous Belt, 68 mm W, 2100 mm OAL, 14 mm Pitch, 150 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates Poly Chain™ GT™ Carbon drive system instead of roller chain in your next power transmission application. The patented use of carbon fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness. When combined with Gates Poly Chain GT sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
Gates® Power Transmission PowerGrip® GT®3 1280-8MGT-50 Synchronous Belt, 50 mm W, 1280 mm OAL, 8 mm Pitch, 160 Teeth, Neoprene
Engineered with the latest in advanced technology and materials science expertise, Gates PowerGrip™ GT4 delivers the highest power-carrying capacity of any belt in its class. In addition, Gates designed a belt with increased chemical resistance and larger temperature range capability. Gates PowerGrip GT4 belt delivers improved performance over a wide range of industrial applications. The 8MGT and 14MGT pitches are the optimum choice for high performance drives in the machine tool, paper and textile industries where durability and low maintenance are required. From resource processing to heavy manufacturing, automated production to custom assembly — Gates PowerGrip GT4 solutions improve uptime, efficiency, productivity, reliability and safety for industries around the world.
Crosby® 1019490, G-2130-5/8, Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019490 Anchor Shackle, 3.25 ton Load, 5/8 in, 0.77 in Dia Bolt Pin, Hot Dipped Galvanized
Browning® 1079383 Split Taper Bushing, 2-1/4 in Dia Bore, 2.7032 in Small End/2.875 in Large End Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Gates® Power Transmission PowerGrip® HTD® 264-3M-15 Synchronous Belt, 15 mm W, 264 mm OAL, 3 mm Pitch, 88 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission Poly Chain® GT® Carbon™ 8MGT-1280-12 Synchronous Belt, 12 mm W, 1280 mm OAL, 8 mm Pitch, 160 Teeth, Polyurethane
Give yourself a competitive advantage by designing in the Gates Poly Chain™ GT™ Carbon drive system instead of roller chain in your next power transmission application. The patented use of carbon fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness. When combined with Gates Poly Chain GT sprockets, you have a lightweight, long-lasting, maintenance-free system that's more than a match for roller chain.
