Pillow Block Roller Bearing Units
P-2-BSD-115-E Dodge® 066254 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
P-2-BSD-115 Dodge® 066218 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
P-2-BSD-111-E Dodge® 066252 111 Special Duty Pillow Block Roller Bearing Unit, 1-11/16 in Dia Bore, 7.56 to 7.94 in L Bolt Center-to-Center, 3.13 in Base to Bore Centerline, 9-1/2 in OAL x 6.81 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Moline Bearing 19341315 Type E Pillow Block Bearing, 3-15/16 in Dia Bore, 11-1/2 in L Bolt Center-to-Center, 4-1/4 in Base to Bore Centerline, 15-1/4 in OAL x 8-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 15⁄16 in (3.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341307 Type E Pillow Block Bearing, 3-7/16 in Dia Bore, 11 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 9-1/2 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-1/4 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 15⁄16 in (2.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19341207 Type E Pillow Block Bearing, 2-7/16 in Dia Bore, 8-1/2 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-1/2 in OAH
Made of Cast Iron, this Solid Type E 4-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, Teflon and Steel, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321307 Type E Pillow Block Bearing, 3-7/16 in Dia Bore, 10-5/8 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 14 in OAL x 7-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 7⁄16 in (3.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321300 Type E Pillow Block Bearing, 3 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 3 in (3.0000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321215 Type E Pillow Block Bearing, 2-15/16 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 15⁄16 in (1.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321211 Type E Pillow Block Bearing, 2-11/16 in Dia Bore, 8-13/16 in L Bolt Center-to-Center, 3-1/8 in Base to Bore Centerline, 12 in OAL x 6-5/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 11⁄16 in (2.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321207 Type E Pillow Block Bearing, 2-7/16 in Dia Bore, 7-7/8 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 10-1/2 in OAL x 5-11/16 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 7⁄16 in (2.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321200 Type E Pillow Block Bearing, 2 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 2 in (2.0000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321115 Type E Pillow Block Bearing, 1-15/16 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 15⁄16 in (1.9375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321112 Type E Pillow Block Bearing, 1-3/4 in Dia Bore, 6-11/16 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8-7/8 in OAL x 4-1/2 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄4 in (1.7500 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321111 Type E Pillow Block Bearing, 1-11/16 in Dia Bore, 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-7/8 in OAL x 4-1/4 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 11⁄16 in (1.6875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321108 Type E Pillow Block Bearing, 1-1/2 in Dia Bore, 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-7/8 in OAL x 4-1/4 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 1⁄2 in (1.5000 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321107 Type E Pillow Block Bearing, 1-7/16 in Dia Bore, 5-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 7-3/8 in OAL x 3-7/8 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 7⁄16 in (1.4375 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321106 Type E Pillow Block Bearing, 1-3/8 in Dia Bore, 5-1/2 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 7-3/8 in OAL x 3-7/8 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄8 in (1.3750 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321104 Type E Pillow Block Bearing, 1-1/4 in Dia Bore, 4-9/16 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-1/4 in OAL x 3 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 1⁄4 in (1.2500 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Moline Bearing 19321103 Type E Pillow Block Bearing, 1-3/16 in Dia Bore, 4-9/16 in L Bolt Center-to-Center, 1-1/2 in Base to Bore Centerline, 6-1/4 in OAL x 3 in OAH
Made of Cast Iron, this Solid Type E 2-Bolt Pillow Block is a Non-Expansion Mounted Roller Bearing Bearing with a 1 3⁄16 in (1.1875 in) shaft size. Includes a Steel Set Screw Locking Insert with a Double Collar, an available Standard V-Guard Contact Seal made of Nitrile, and a Standard Painted finish, this bearing is ready for even the toughest of jobs.
Link-Belt® 10443071 6800 Two-Piece Split Housed Pillow Block Spherical Roller Bearing Unit With 22200LBK Bearing, 2-3/16 in Dia Bore, 8-1/8 to 9-1/2 in L Bolt Center-to-Center, 3 in Base to Bore Centerline, 11 in OAL x 5-15/16 in OAH
Self-aligning spherical roller bearing pillow blocks and take-ups provide high load carrying capacity for radial or combination radial and thrust loads. They are designed for use on conveyors, dryers, road building equipment, runout tables, fans, crushers, hammer mills and many other high-precision, heavy-duty applications.
Recently Viewed
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
RIDGID® 14213 S14 General Purpose Heavy Duty Bolt Cutter, 5/16 in Soft Materials Cutting, 15 in OAL, Center Cut, Alloy Steel Jaw
RIDGID® 14-inch long bolt cutters are made of hardened alloy steel for long-term performance and smooth, precise cutting. One-step internal cam mechanism provides the quickest and simplest way to keep the cutting blades aligned, while the rubber handles assure a tight grip for greater control. Cut through hard metals (42RC) up to 3/16-inch in diameter.
A-327-1/4 CROSBY 1/4" EYE SLING HOOKS-
You said: CROSBY A3271/4The Crosby A327 1/4" (specifically manufacturing part number 1003764) is a heavy-duty, Grade 80 Alloy Steel Eye Sling Hook. This high-strength industrial rigging hook is engineered for overhead lifting and chain sling assemblies. Note that while the model has been largely succeeded by newer Grade 100 variations like the L-1327, it is still highly sought after as a reliable component for existing legacy lifting setups.
A-323-5/16 CROSBY MATERIAL HANDLING GROUP 5/16" FORGED-EYE GRAB HOOK
The designation CROSBY A323 5/16 refers to a 5/16-inch alloy eye hook or rigging component manufactured by The Crosby Group.However, because industrial catalogs often have highly precise alphanumerical overlaps, this part string typically matches two entirely different types of hardware.
H-330-3/4 CROSBY MATERIAL HANDLING GROUP 3/4" CLEVIS GRAB HOOKS
The Crosby H-330 3/4" is a heavy-duty, forged carbon steel clevis grab hook with a Working Load Limit (WLL) of 20,200 lbs (10.1 tons). Manufactured by the Kito Crosby Group (Stock Number: 1027221), this industrial rigging component is specifically engineered for quick assembly to a chain without the need for coupling links.
A-327-5/8 CROSBY 5/8" ALLOY SLING HOOK-
Alloy Steel – Quenched and Tempered.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
S-4088 Latch Kit fits hooks.
