Sealmaster 2-3/16"-ID SPH/OD INSERT BEARINGS SEA 3-23-T
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
-
BrandSealmaster®
-
UPC662461029336
-
Manufacturer Part Number705335
-
CountryUSA
-
Load Capacity11789 lb Dynamic/8150 lb Static
-
Cage MaterialBrass
-
Temperature Rating250 deg F
-
FinishBlack Oxide Coated
-
Maximum Speed4100 rpm
-
Closure TypeDouble Seal
-
TypeMedium Duty Non-Expansion Straight Bore
-
Seal MaterialFelt
-
Width2-5/8 in
-
Bearing MaterialSteel
-
Outside Diameter4.331 in
-
Bore Diameter2.188 in
- Skwezloc® collar locking
- Lithium complex NLGI #2 grease with an EP additive
- Zone hardened inner race
- Wide outer race
- Lock pin and dimple system
- Land riding retainer
- Metal nameplate riveted to the housing allows for easy identification even after years of operation
-
Alternative Part Number3-23T
-
UNSPSC31171504
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® Gearbelt® 1055409 Type 2 Synchronous Timing Pulley With Flange, 5/8 to 7/8 in Bore, 2.174 in OD, 14 Grooves, 2.228 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Morse® Metal Devil NXT™ 101318 Metal Devil NXT™ Circular Saw Blade, 14 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 66 Teeth
Morse® Metal Devil NXT™ 101318 Metal Devil NXT™ Circular Saw Blade, 14 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 66 Teeth
Enerpac® RC756 General Purpose Single Acting Spring Return Solid Plunger Hydraulic Cylinder, 79.5 ton Capacity, 4-1/2 in Bore, 6.13 in L Stroke, 11-1/4 in Retract, 2.81 in Dia Rod, 10000 psi Pressure
Enerpac® RC756 General Purpose Single Acting Spring Return Solid Plunger Hydraulic Cylinder, 79.5 ton Capacity, 4-1/2 in Bore, 6.13 in L Stroke, 11-1/4 in Retract, 2.81 in Dia Rod, 10000 psi Pressure
V-BELTOUTSIDE CIRCUMFERENCE >139"-JASB136 >
