Dichtomatik N70147 O-Ring, 147 Dash Number, 2.675 in ID x 2.881 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 147
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70147
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter2.675 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter2.881 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
1-3/16"-ID FLAT-OD INSERT BEARING - FAF1103KRR>
Weiler® 44079 Industrial Grade Performance Line Maintenance Tube Brush, 3/8 in Dia x 1 in L, 6-1/2 in OAL, Steel Fill
Weiler® 44079 Industrial Grade Performance Line Maintenance Tube Brush, 3/8 in Dia x 1 in L, 6-1/2 in OAL, Steel Fill
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63112RSNR >
Duracell® DL2450 Photo Lithium Coin Battery, 3 V DC, 620 mAh, 24.5 mm Dia x 5 mm H Battery
They have up to a 10-year guarantee in storage so you can be confident these lithium coin button batteries will be ready when you need them. To help ensure the safety of your children, they have been designed with child-resistant packaging. And you can be assured that they’re batteries you can trust because Duracell® is the #1 trusted battery brand.
Gardner Bender 20-153P Male Crimp Terminal, 16 to 14 AWG Conductor, 1/4 in Tab, Insulated Barrel, Vinyl, Blue
Dependable and easy to use, Gardner Bender terminals and wiring accessories offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. These disconnects have a vinyl insulated barrel and are rated at 600 V maximum.
