NIBCO 75-102-01 2-Piece Ball Valve, 3/8 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE Softgoods, Domestic
This Apollo⢠Ball Valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the OPEN or CLOSED position with the same hardware.
-
BrandApolloā¢
-
UPC670750690938
-
Manufacturer Part Number7510201
-
CountryUSA
-
Temperature Rating50 to 200 deg F
-
Port TypeStandard
-
Pressure Rating600 psi CWP
-
Top to Inlet Center1.81 in
-
Trim MaterialBrass Stem/RPTFE Seat
-
Type2-Piece
-
Actuator TypeLever Operated
-
Nominal Size3/8 in
-
Series75-100
-
Ball MaterialChrome Plated Brass
-
Inlet to Outlet Length2-1/4 in
-
Softgoods MaterialMPTFE
-
Domestic/ImportDomestic
-
Body MaterialBronze
-
Orifice Size1/2 in
-
End StyleFNPT
- Blow-out proof stem design
- Hardened ball for wear resistance
- May be padlocked in open or closed position with no change of hardware
- Zinc plated with vinyl steel lever and grip
- Zinc plated steel lever nut
- UNS C84400 B584 bronze body
- 150 psi steam working pressure
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | A7510201 |
-
UNSPSC40141607
-
Package Description10/BX
-
Standards/ApprovalsCRN OC10908.5C|Federal Specifications WW-V-35C|Type II|Composition BZ|Style 3|MSS SP-110|OSHA Standard|PROP65: Cancer and Reproductive Harm
-
Warranty5 Years
-
Catalog
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
NIBCO 75-102-01 2-Piece Ball Valve, 3/8 in Nominal, FNPT End Style, Bronze Body, Standard Port, MPTFE Softgoods, Domestic
This Apollo⢠Ball Valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the OPEN or CLOSED position with the same hardware.
BBI 042150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042150 Partially Threaded Cap Screw, 3/8-16, 2-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
The BrowningĀ® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the BrowningĀ® torque limiter has a higher torque density than the MorseĀ® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
GENERALĀ® 370-2 Horseshoe Magnet, 1-1/8 in W
Ambore⢠12069 1384 Heavy Duty Jobber Length Drill Bit, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
Ambore⢠12069 1384 Heavy Duty Jobber Length Drill Bit, 11/64 in Drill - Fraction, 0.1719 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
TAPERED ROLLER BEARING CUPS-TPR09195 >


