Temperature & Pressure Relief Valves
WATTS® 0066107 100XL Self-Closing Temperature and Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, 180 deg F, 3 in L Probe, Brass Body
This 3/4 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, 8 inch extension thermostat with special thermo-bonded coating, and a test lever. It is ASME rated and CSA listed. The temperature relief is at 180 degrees F, and the pressure relief is 150 psi (10.6 bar).
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
Recently Viewed
GP® 920T Standard Length Socket Driver Bit, 1/4 in Internal Star Drive, T20, 0.11 in L Bit
90 DEG GASKETED PULING ELBOW, MADE OF MALLEABLE IRON, FINISHED IN ZINC ELECTROPLATE, CHROMATE AND EPOX POWDER
APLFFL125 >
1/2" EMT CONDUIT PULL ELBOWS-APLTHL500>
1/2" EMT 1-HOLE CONDUIT CLAMPS - STEEL - 15/16" X 15/32" X 1-1/16"-APLTWCL150 >
Extra deep length 6-point impact socket
Over 4-3/8" bolt clearance depth
Made from high quality chrome-molybdenum steel
Heat treated for strength and durability
Size markings are hard stamped into the socket for easy identification
1/2" Drive x 13mm Extra-Deep Length 6-Point Impact Socket. Our impact sockets grip the fastener across a broader contact area, reducing chance of rounding off fasteners. They also allow up to 20% more torque to be applied than on other impact sockets. The shift in pressure allows us to reduce the socket wall thickness, increasing access to tight areas.
Dodge® 015843 Tire Close Coupled Raptor Coupling Element, E2 Coupling, 3.22 in L, 3-1/2 in OD, 7500 rpm Max, Natural Rubber
Dodge® 015843 Tire Close Coupled Raptor Coupling Element, E2 Coupling, 3.22 in L, 3-1/2 in OD, 7500 rpm Max, Natural Rubber
