WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
-
BrandWATTS®
-
UPC098268000306
-
Manufacturer Part Number0002220
-
CountryUSA
-
Temperature Rating210 deg F
-
Pressure Rating125 psi
-
MediaWater
-
Trim MaterialStainless Steel Spring
-
TypeSelf-Closing
-
Actuator TypeTest Lever
-
Nominal Size1/2 in
-
Series1L Series
-
Body MaterialBronze
-
End StyleMNPT x FNPT
- Solid bronze body construction
- Unique thermostat with special thermo-bonded coating
| Cross-Reference Number |
|---|
| 401156 |
-
Alternative Part NumberDP1L-TT-125210
-
UNSPSC40141606
-
Package DescriptionEACH
-
Standards/ApprovalsASME Specified|CSA Certified|PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Warranty1 year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
WATTS® 0002220 1L Series Self-Closing Temperature and Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 125 psi Pressure, 210 deg F, Bronze Body
This 1/2 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU/hr. It features a bronze body with NPT threaded male inlet and NPT threaded female outlet connections, 2 inch short thermostat with special thermo-bonded coating and test lever. It is CSA listed. Temperature relief at 210 degrees F (99 degree C), pressure relief range is 75 to 150 psi. The standard pressure settings is 125 psi.
APOLLO VALVE LOCKING HANDLE-NIBW648200 >
Gates AX45 Tri-Power® 90122045 V-Belt - AX Section, 1 Band, 47.00 in Outside Length, Cogged, TRI-POWER®
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
2" X 60" 2-PLY TWISTED-EYE NYLON SLING - SWC20521 >
Gates® Power Transmission PowerGrip® GT®2 P64-8MGT-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 6.362 in OD, 64 Grooves, 6.416 in Dia Pitch, 1.12 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Enerpac® RC-1012 General Purpose Industry Standard Single Acting Hydraulic Cylinder, 10 ton Capacity, 12 in L Stroke, 10000 psi
Enerpac® hydraulic cylinders are available in hundreds of different configurations. Whatever the industrial application lifting, pushing, pulling, bending, holding, whatever the force capacity, stroke length, or size restrictions, single- or double-acting, solid or hollow plunger, you can be sure that Enerpac® has the cylinder to suit your high force application.
