OIL SEALS
TCM25X44X7TC>
TCM25X46X7TC>
TCM25X47X10TC>
TCM25X48X7TC>
TCM25X48X8TC>
2.500" X 3.505" X .250" OIL SEAL-CHI25028 >
OIL SEALS-2.500" X 3.505" X .250"-IMS25028>
TCM250384SAY>
OIL SEALS-NAT2506>
2.500" X 3.543X.438" OIL SEAL-CHI25065 >
OIL SEALS-2.500" X 3.623" X .438"-IMS25071>
• Shaft Diameter (ID): 25.00 mm (0.984 inches)
• Housing Bore (OD): 50.00 mm (1.969 inches)
• Seal Width (Thickness): 7.00 mm (0.276 inches)
• Design Profile: Double-lip (TC Style) featuring a primary spring-loaded lip for oil/grease retention and an auxiliary dust lip to keep external dirt out of the assembly.
• Material: Nitrile Rubber (Buna-N / NBR) with a carbon steel reinforcement case and internal garter spring.
OIL SEALS-2.500" X 3.623" X .375"-CHI25074>
2.500" X 3.623" X .375" OIL SEAL - CHI25075>
OIL SEALS-2.500" X 3.502" X .406"-IMS25082>
2.500" X 3.876X.438" OIL SEAL-CHI25100 >
2.500" X 3.876X.469" OIL SEAL-CHI25102 >
OIL SEALS-2.500" X 3.876" X .469"-IMS25102>
2.500" X 4.003X3.75" OIL SEAL-CHI25108 >
OIL SEALS-.250" X .749" X .250"-CHI2512>
.250" X .749" X .250" OIL SEAL - CHI2513>
.250" X .749" X .250" OIL SEAL-CHI2514 >
OIL SEALS-2.500" X 4.938" X .500"-CHI25146>
OIL SEALS-TYPE J FLANGE SEALS-IMS25160>
Recently Viewed
XXXXL TYVEK COVERALLS W/ELASTIC AT WRISTS & ANKLES
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
Browning® 767455 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 1-1/4 in Dia Bore, 2.8346 in OD, 1-11/16 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
Gates® Power Transmission Super HC® 5VX830 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 83 in L Outside, 35/64 in THK, EPDM
Finding a belt that fits into your compact machinery without sacrificing power or efficiency is a daily challenge. When every inch of space is precious and traditional belts just don't cut it, the Super HC Molded Notch (MN) V-belt is your solution. This bandless, high-performance belt, crafted from ethylene elastomer with precision-molded notches, provides superior cord support and flexibility to improve load distribution and reduce maintenance needs. Whether you aim to boost your drive efficiency or minimize downtime, Gates Super HC MN V-belts deliver the durability and performance to keep your industrial processes running smoothly.
Littelfuse® POWR-GARD® LLSRK040 Current Limiting Time Delay Fuse, 40 A, 600 V AC/300 V DC, 200/20 kA Interrupt, RK1 Class, Cartridge Body
Littelfuse® LLNRK and LLSRK series POWR-PRO® fuses provide superior overload and short circuit protection for service entrance, main, feeder and general purpose branch circuits upto 600 A. LLNRK/LLSRK series fuses can be installed in existing Class H fuse blocks to upgrade systems containing lower interrupting rating Class H one-time or renewable fuses.
