OIL SEALS
2.559" X 3.465" X .315" OIL SEAL-CHI25425 >
OIL SEALS-2.559" X 3.465" X .315"-IMS25425>
OIL SEALS-2.559" X 3.543" X .394"-CHI25427>
.750" X 1.129" X .187" OIL SEALS-NAT254270>
.875" X 1.255" X .250" OIL SEAL-NAT254287>
OIL SEALS-2.559" X 3.543" X .315"-IMS25430>
2.559" X 3.937" X .315" OIL SEAL-CHI25440 >
OIL SEALS-2.560" X 3.094" X .256"-CHI25515>
OIL SEALS-2.560" X 3.094" X .256"-IMS25515>
2.563" X 3.481" X .500" OIL SEAL - CHI25561>
OIL SEALS-.250" X .749" X .188" OIL SEALS-CHI2560>
2.563" X 3.623" X .438" OIL SEAL-CHI25641 >
OIL SEALS-2.563" X 3.623" X .469"-IMS25661>
2.563" X 3.876X.438" OIL SEAL-CHI25748 >
TCM259344PTA>
2.594" X 3.063" X .512" OIL SEAL - CHI25935>
OIL SEALS-2.594" X 3.063" X .512"-IMS25935>
• Standard Dimensions: Formatted to fit a 32 mm Inside Diameter (Shaft) x 47 mm Outside Diameter (Bore) profile with a 10 mm Width (Thickness).
• Design Configuration: Built as a Type-WAS / double-lip seal featuring an internal carbon steel stiffening case and an integrated garter spring. The design includes a primary sealing lip alongside an auxiliary dust lip to prevent external debris from entering the internal assembly.
• Material: Nitrile rubber (Buna-N / NBR) casing providing reliable tolerance against petroleum-based lubricants, greases, and hydraulic fluids.
2.598" X 3.481" X .438" OIL SEAL - CHI25970>
OIL SEALS-2.598" X 3.481" X .438"-IMS25970>
OIL SEALS-2.598" X 3.999" X .787"-IMS25990>
.984" X 1.378" X .276" OIL SEALS-TCM25X35X7TC >
.984" X 1.457" X .276" OIL SEALS-TCM25X37X7TC >
.984" X 1.496" X .276" OIL SEALS-TCM25X38X7TC >
Recently Viewed
Gates® Power Transmission Hi-Power® II CC75 Banded Heavy Duty Double V-Belt, CC Section, 7/8 in W Top, 79 in L Outside, 23/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission Hi-Power® II A94 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 96 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission Hi-Power® II BB75 Banded Heavy Duty Double V-Belt, BB Section, 21/32 in W Top, 78 in L Outside, 17/32 in THK, EPDM
Designed with a unique recessed top and bottom to maintain sidewall contact, while remaining flexible for belt drive applications that require power transmission from both sides of the belt.
Gates® Power Transmission Hi-Power® II A83 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 85 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
